Products

Home›Products

PFU0801 Rolled Miniature Ball Screw
Miniature Ball Screw

PFU0801 Rolled Miniature Ball Screw

Series / Model PFU0801

Review PFU0801: 8 mm shaft and 1 mm lead in the rolled catalog. Compare its ratings with PFU0802 and confirm the complete mounting configuration.

Product information

Overview

PFU0801 is the rolled 8 mm shaft reference with 1 mm lead. Its main nut dimensions include D = 14 mm, A = 27 mm and L = 16 mm. The published PFU0802 uses the same listed main envelope, which makes lead and rating identification especially important when comparing these two catalog rows.

Published catalog reference

PFU0801 – rolled catalog reference
Characteristic Value Unit or notation
Nominal shaft diameter d 8 mm
Lead I 1 mm/rev
Ball diameter Da 0.8 mm
Circuit notation n 3 catalog notation
Basic dynamic load rating Ca 650 N
Basic static load rating Coa 1300 N
Nut body dimension D 14 mm
Flange dimension A 27 mm
Dimension B 4 mm
Nut length L 16 mm
Dimension W 21 mm
Dimension H 18 mm
Dimension X 3.4 mm

Ca and Coa are the catalog basic dynamic and static load ratings in N. They are not a blanket permissible operating load. The source row and the matching rolled PDF row agree, but this reference table is not an ordering or shaft-end machining drawing.

A shared envelope still needs an exact model reference

The rolled PFU0801 row lists Ca = 650 N and Coa = 1300 N. PFU0802 lists 1300 N and 2300 N for those fields. These are different basic rating quantities for different rows, even though the main nut envelope matches. Do not carry the PFU0802 rating values into a PFU0801 calculation or treat an envelope match as an allowable working-load statement.

Also keep PFU0801 separate from the published PFU0802w. That suffix belongs to a different source row with d = 7.5 mm, D = 16 mm and L = 25 mm. Neither the common 08 prefix nor a similar photograph identifies a replacement. For a fine-travel axis, define the required accuracy and feedback arrangement independently of the 1 mm lead.

Specify the complete installation

For PFU0801, identify the selected rolled row on the inquiry and show the existing 8 mm shaft interfaces. If comparing with PFU0802, state why the 1 mm lead is required and provide the actual load and motion cycle.

Confirm total length, usable stroke, shaft ends, supports and the nut mounting interface as one assembly. State the required travel accuracy, axial play or preload, lubrication and environment. This page does not assign an accuracy grade, preload option, stock status, price or delivery date.

Questions about PFU0801

Can PFU0802 load ratings be used for PFU0801?

No. The catalog lists different Ca and Coa values for the two models. Use the PFU0801 row for the reference calculation and review the intended duty, supports and configuration before accepting the selection.

Is PFU0801 the same shaft reference as PFU0802w?

No. PFU0801 lists d = 8 mm. The separate PFU0802w row lists d = 7.5 mm and different nut dimensions. Preserve the complete designation, including suffixes, on drawings and inquiries.

Do the PFU dimension and rating rows confirm an accuracy grade?

No accuracy grade, preload or axial-play configuration is assigned by this row. State the required travel accuracy and inspection conditions, then confirm the offered configuration on the quotation and controlled drawing.

What is needed to quote PFU0801 as a complete assembly?

Send the exact rolled model, quantity, total length, usable stroke, shaft-end and nut-mounting drawing, supports, load and speed cycle, lubrication and environment requirements. Confirm the offered drawing revision and commercial terms before ordering.

Request PFU0801 quotation review

Compare the Rolled miniature ball screw family table and the existing PFU0802 Rolled Miniature Ball Screw reference. Send the selected model and installation details through the PFU0801 inquiry page so the offered configuration can be identified.

Custom requirements

Need help selecting a model or configuration?

Send the exact model, assembly drawing and load cycle. Confirm the offered configuration, drawing revision and inspection basis with the quotation.

Discuss your application
Product inquiry

Request a quote or engineering review