PFU0810 Rolled Ball Screw
Series / Model PFU0810
Review PFU0810 rolled ball screw data: 8 mm shaft, 10 mm lead and 25 mm nut length. Compare the exact row and mounting interfaces before quotation.
Overview
PFU0810 is listed in the Series Motion rolled PFU table with a 8 mm shaft and 10 mm lead. This page brings the exact source row together with mounting and configuration checks for an inquiry.
Review the 10 mm lead within the 8 mm shaft family
PFU0810 lists an 8 mm shaft, 10 mm lead and 25 mm nut length. Its D = 18 mm and A = 31 mm references match PFU0808, but PFU0808 has an 8 mm lead and a 20 mm nut length. A common flange envelope therefore does not preserve the axial package or travel per revolution.
For a specified travel speed, a different lead changes the required screw speed. Recheck the motion scaling and shaft-speed requirement when changing from PFU0808; do not infer a higher allowable axis speed from the larger lead. Review the moving nut at both travel limits with the additional length.
Published rolled catalog reference
| Reference field | Value | Unit or notation |
|---|---|---|
| Shaft diameter d | 8 | mm |
| Lead I | 10 | mm/rev |
| Ball diameter Da | 1.5875 | mm |
| Circuit notation n | 1.6*2 | catalog notation |
| Basic dynamic load rating Ca | 2200 | N |
| Basic static load rating Coa | 3800 | N |
| Nut body D | 18 | mm |
| Flange A | 31 | mm |
| Dimension B | 4 | mm |
| Nut length L | 25 | mm |
| Dimension W | 25 | mm |
| Dimension H | 20 | mm |
| Dimension X | 3.4 | mm |
The values above agree between the published rolled-family HTML row and physical page 3 of the company Ball Screw catalog (printed Ball Screw-2). Keep the source drawing with the dimensional letters. Ca and Coa are catalog basic load ratings in N, not recommended working loads or a simultaneous operating envelope.
Keep the process and complete assembly explicit
PFU identifies a nut configuration; it does not by itself establish rolled versus ground manufacture, an accuracy grade or a supplied preload. This reference uses the rolled table specifically. Preserve any suffix and distinguish the screw lead from ball-circuit notation when preparing the order description.
Review shaft ends, supports, nut mounting and the moving envelope together. Include the whole load and motion cycle rather than a single maximum speed or force. Lubrication, environmental protection and acceptance measurements should be agreed for the offered assembly. Catalog inclusion does not confirm current stock, price or delivery time.
Questions about PFU0810
What distinguishes the PFU0810 reference?
PFU0810 lists an 8 mm shaft, 10 mm lead and 25 mm nut length. Its D = 18 mm and A = 31 mm references match PFU0808, but PFU0808 has an 8 mm lead and a 20 mm nut length. A common flange envelope therefore does not preserve the axial package or travel per revolution.
Does the PFU0810 row specify travel accuracy or preload?
The dimensions and load ratings do not assign a complete accuracy or preload configuration. State the required positioning accuracy, axial play or preload and inspection conditions, then confirm the offered assembly designation and drawing.
Is L = 25 mm the PFU0810 working stroke?
No. L is the nut-length dimension. Working stroke, total shaft length, end machining, bearing supports and end clearances need their own assembly drawing.
What information is required for a PFU0810 quotation?
Include the exact rolled model and any suffix, quantity, shaft length and end drawing, usable stroke, nut mounting layout, support arrangement, load and speed cycle, lubrication, environment and accuracy requirement. Ask for confirmation of the offered configuration and commercial terms.
Compare the source and send an inquiry
Open the rolled miniature ball screw family table and the PFU0808 Rolled Miniature Ball Screw reference. Send the exact model and installation drawing through the PFU0810 inquiry page for configuration review.
Need help selecting a model or configuration?
This page is a catalog reference. Send the exact model, drawing and load cycle to confirm the offered configuration and commercial terms.
