PFU1004 Rolled Ball Screw
Series / Model PFU1004
Review PFU1004 rolled ball screw data: 10 mm shaft, 4 mm lead and 34 mm nut length. Compare the exact row and mounting interfaces before quotation.
Overview
PFU1004 is listed in the Series Motion rolled PFU table with a 10 mm shaft and 4 mm lead. This page brings the exact source row together with mounting and configuration checks for an inquiry.
Allow for the larger nut envelope in the 10 mm shaft family
PFU1004 uses a 10 mm shaft and 4 mm lead with D = 26 mm, A = 46 mm and L = 34 mm. Compared with PFU1002, the shaft diameter stays at 10 mm while D changes from 18 to 26 mm, A from 35 to 46 mm and B from 5 to 10 mm.
A shaft-size filter alone would hide these mounting changes. Check the surrounding housing, flange seating and axial package before choosing the 4 mm lead. The different catalog ratings are useful reference fields, but the required operating load, duty and support arrangement still determine whether the complete assembly is appropriate.
Published rolled catalog reference
| Reference field | Value | Unit or notation |
|---|---|---|
| Shaft diameter d | 10 | mm |
| Lead I | 4 | mm/rev |
| Ball diameter Da | 2 | mm |
| Circuit notation n | 3 | catalog notation |
| Basic dynamic load rating Ca | 2310 | N |
| Basic static load rating Coa | 5261 | N |
| Nut body D | 26 | mm |
| Flange A | 46 | mm |
| Dimension B | 10 | mm |
| Nut length L | 34 | mm |
| Dimension W | 36 | mm |
| Dimension H | 28 | mm |
| Dimension X | 4.5 | mm |
The values above agree between the published rolled-family HTML row and physical page 3 of the company Ball Screw catalog (printed Ball Screw-2). Keep the source drawing with the dimensional letters. Ca and Coa are catalog basic load ratings in N, not recommended working loads or a simultaneous operating envelope.
Keep the process and complete assembly explicit
PFU identifies a nut configuration; it does not by itself establish rolled versus ground manufacture, an accuracy grade or a supplied preload. This reference uses the rolled table specifically. Preserve any suffix and distinguish the screw lead from ball-circuit notation when preparing the order description.
Review shaft ends, supports, nut mounting and the moving envelope together. Include the whole load and motion cycle rather than a single maximum speed or force. Lubrication, environmental protection and acceptance measurements should be agreed for the offered assembly. Catalog inclusion does not confirm current stock, price or delivery time.
Questions about PFU1004
What distinguishes the PFU1004 reference?
PFU1004 uses a 10 mm shaft and 4 mm lead with D = 26 mm, A = 46 mm and L = 34 mm. Compared with PFU1002, the shaft diameter stays at 10 mm while D changes from 18 to 26 mm, A from 35 to 46 mm and B from 5 to 10 mm.
Does the PFU1004 row specify travel accuracy or preload?
The dimensions and load ratings do not assign a complete accuracy or preload configuration. State the required positioning accuracy, axial play or preload and inspection conditions, then confirm the offered assembly designation and drawing.
Is L = 34 mm the PFU1004 working stroke?
No. L is the nut-length dimension. Working stroke, total shaft length, end machining, bearing supports and end clearances need their own assembly drawing.
What information is required for a PFU1004 quotation?
Include the exact rolled model and any suffix, quantity, shaft length and end drawing, usable stroke, nut mounting layout, support arrangement, load and speed cycle, lubrication, environment and accuracy requirement. Ask for confirmation of the offered configuration and commercial terms.
Compare the source and send an inquiry
Open the rolled miniature ball screw family table to compare the PFU1002 row. Send the exact model and installation drawing through the PFU1004 inquiry page for configuration review.
Need help selecting a model or configuration?
This page is a catalog reference. Send the exact model, drawing and load cycle to confirm the offered configuration and commercial terms.
