Products

Home›Products

PFU1210w Rolled Ball Screw
Miniature Ball Screw

PFU1210w Rolled Ball Screw

Series / Model PFU1210w

Review PFU1210w rolled ball screw data: 11.4 mm shaft, 10 mm lead and 30 mm nut length. Compare the exact row and mounting interfaces before quotation.

Product information

Overview

PFU1210w is listed in the Series Motion rolled PFU table with a 11.4 mm shaft and 10 mm lead. This page brings the exact source row together with mounting and configuration checks for an inquiry.

Do not lose the w suffix when comparing 10 mm lead assemblies

PFU1210w has an 11.4 mm shaft and 10 mm lead, with a 30 mm nut length. Its circuit notation is 2. The PFU1210 reference instead lists a 12 mm shaft and 1.7*2 circuit notation, while also changing flange dimensions and the Ca and Coa entries.

The source circuit notation should be retained exactly, not interpreted as the number of thread starts. On the dimensional side, H is 35 mm for PFU1210w and 26 mm for PFU1210. Check the full nut outline and shaft interfaces even though their lead, D and L values match.

Published rolled catalog reference

PFU1210w rolled PFU dimensions and ratings
Reference field Value Unit or notation
Shaft diameter d 11.4 mm
Lead I 10 mm/rev
Ball diameter Da 2 mm
Circuit notation n 2 catalog notation
Basic dynamic load rating Ca 2630 N
Basic static load rating Coa 3630 N
Nut body D 24 mm
Flange A 40 mm
Dimension B 10 mm
Nut length L 30 mm
Dimension W 32 mm
Dimension H 35 mm
Dimension X 4.5 mm

The values above agree between the published rolled-family HTML row and physical page 3 of the company Ball Screw catalog (printed Ball Screw-2). Keep the source drawing with the dimensional letters. Ca and Coa are catalog basic load ratings in N, not recommended working loads or a simultaneous operating envelope.

Keep the process and complete assembly explicit

PFU identifies a nut configuration; it does not by itself establish rolled versus ground manufacture, an accuracy grade or a supplied preload. This reference uses the rolled table specifically. Preserve any suffix and distinguish the screw lead from ball-circuit notation when preparing the order description.

Review shaft ends, supports, nut mounting and the moving envelope together. Include the whole load and motion cycle rather than a single maximum speed or force. Lubrication, environmental protection and acceptance measurements should be agreed for the offered assembly. Catalog inclusion does not confirm current stock, price or delivery time.

Questions about PFU1210w

What distinguishes the PFU1210w reference?

PFU1210w has an 11.4 mm shaft and 10 mm lead, with a 30 mm nut length. Its circuit notation is 2. The PFU1210 reference instead lists a 12 mm shaft and 1.7*2 circuit notation, while also changing flange dimensions and the Ca and Coa entries.

Does the PFU1210w row specify travel accuracy or preload?

The dimensions and load ratings do not assign a complete accuracy or preload configuration. State the required positioning accuracy, axial play or preload and inspection conditions, then confirm the offered assembly designation and drawing.

Is L = 30 mm the PFU1210w working stroke?

No. L is the nut-length dimension. Working stroke, total shaft length, end machining, bearing supports and end clearances need their own assembly drawing.

What information is required for a PFU1210w quotation?

Include the exact rolled model and any suffix, quantity, shaft length and end drawing, usable stroke, nut mounting layout, support arrangement, load and speed cycle, lubrication, environment and accuracy requirement. Ask for confirmation of the offered configuration and commercial terms.

Compare the source and send an inquiry

Open the rolled miniature ball screw family table to compare the PFU1210 row. Send the exact model and installation drawing through the PFU1210w inquiry page for configuration review.

Custom requirements

Need help selecting a model or configuration?

This page is a catalog reference. Send the exact model, drawing and load cycle to confirm the offered configuration and commercial terms.

Discuss your application
Product inquiry

Request a quote or engineering review