Products

Home›Products

PCI1004 Ball Screw
Ball Screw Catalog Models

PCI1004 Ball Screw

Series / Model PCI1004

Review PCI1004 ball screw dimensions: d = 10 mm, 4 mm lead and L = 34 mm. Compare the nut interface and request a drawing review.

Product information

Overview

PCI1004 is a PCI ball-screw catalog reference with d = 10 mm and I = 4 mm lead. This page supports a model-specific drawing and quotation review, with published dimensions and a comparison to PCI1002.

Compare 2 mm and 4 mm lead cylindrical nuts for a 10 mm screw

The 4 mm lead model is wider and longer, with a different R callout. Confirm that the new housing has the required clearance before treating it as a lead-only replacement.

I = 4 mm versus 2 for PCI1002; D = 26 mm versus 18 for PCI1002; L = 34 mm versus 28 for PCI1002; R = 3 mm versus 1.8 for PCI1002. These are catalog comparisons, not an interchangeability approval. Check the entire assembly whenever the screw or nut model changes.

PCI1004 dimensions and basic load ratings

PCI1004 catalog reference, Series Ball Screw, printed page 6
Drawing field Value Unit or notation
d 10 mm
I 4 mm
Da 2.0 mm
n 3 catalog circuit notation
Ca(N) 2310 N
Coa(N) 5261 N
D 26 mm
L 34 mm
R 3 mm

I denotes lead, Da denotes ball diameter and n is the catalog circuit notation. Keep n exactly as shown; it is not a thread-start count. Ca and Coa are basic dynamic and static load ratings in newtons. They are not a continuous operating-load limit or a promised service life.

Review the nut-to-carriage interface

The PCI reference shows a cylindrical nut with a longitudinal mounting feature. D = 26 mm, L = 34 mm and R = 3 mm must be read with that drawing. The row does not specify every mating-key, fit, retention or lubrication detail needed to machine a housing.

The listed L dimension is the nut length, not the working stroke. Specify shaft length, end machining, bearing supports and end clearances separately. Mark the nut orientation and lubrication access in the assembly so that the mounting decision can be checked before ordering.

Confirm the duty before selecting the assembly

Use the 4 mm lead when translating the required linear travel into screw rotation. Lead alone does not establish achievable speed or positioning accuracy. Check screw length, support arrangement, rotational speed, acceleration, axial loading and required service life together.

Provide the external guide arrangement and any side loads or moments on the carriage. Review lubrication, seals and contamination protection for the actual installation. Confirm the raceway manufacturing method, accuracy and preload or clearance of the offered configuration; the catalog heading and model reference are not a stock, delivery or performance commitment.

Questions about PCI1004

How does PCI1004 differ from PCI1002?

I = 4 mm versus 2 for PCI1002; D = 26 mm versus 18 for PCI1002; L = 34 mm versus 28 for PCI1002; R = 3 mm versus 1.8 for PCI1002. The 4 mm lead model is wider and longer, with a different R callout. Confirm that the new housing has the required clearance before treating it as a lead-only replacement.

Does the PCI1004 row define a complete mounting key?

No. It gives the drawing callout R = 3 mm together with the nut envelope. Obtain the controlled drawing for the mating feature, fit and axial retention before manufacturing the housing.

Does PCI1004 guarantee a particular accuracy or preload?

The model identifies a catalog configuration. Confirm the complete designation, raceway manufacturing method, accuracy class, axial clearance or preload and inspection conditions in the quotation. A model prefix alone does not establish these properties.

What should I send for a PCI1004 quotation?

Specify PCI1004, quantity, working stroke, total shaft length, end-machining drawing, mounting arrangement, axial load cycle, travel speed, acceleration, required life and accuracy. Include lubrication access and the operating environment, and request confirmation of the offered drawing revision.

Request the PCI1004 drawing and configuration

Review the complete ball-screw family tables and drawings for the original notation. Send your layout and duty information through the PCI1004 inquiry page. Ask the quotation to identify the exact assembly, shaft ends, drawing revision and inspection requirements.

Custom requirements

Need help selecting a model or configuration?

This page is a catalog reference. Send the exact model, drawing and load cycle to confirm the offered configuration and commercial terms.

Discuss your application
Product inquiry

Request a quote or engineering review