Products

Home›Products

PFS2020 Ball Screw
Ball Screw Catalog Models

PFS2020 Ball Screw

Series / Model PFS2020

Review PFS2020 ball screw dimensions: d = 20 mm, 20 mm lead and L = 57 mm. Compare the nut interface and request a drawing review.

Product information

Overview

PFS2020 is a PFS ball-screw catalog reference with d = 20 mm and I = 20 mm lead. This page supports a model-specific drawing and quotation review, with published dimensions and a comparison to PFS1620.

Keep 20 mm lead while moving to the 20 mm shaft reference

The listed nut length remains 57 mm while shaft diameter, flange envelope and ratings change. Verify the larger body and flange clearances instead of extending an existing PFS1620 layout by shaft diameter alone.

d = 20 mm versus 15 for PFS1620; D = 36 mm versus 28 for PFS1620; A = 58 mm versus 48 for PFS1620; H = 44 mm versus 40 for PFS1620; Ca(N) = 5510 N versus 4150 for PFS1620. These are catalog comparisons, not an interchangeability approval. Check the entire assembly whenever the screw or nut model changes.

PFS2020 dimensions and basic load ratings

PFS2020 catalog reference, Series Ball Screw, printed page 11
Drawing field Value Unit or notation
d 20 mm
I 20 mm
Da 3.175 mm
n 1.8×1 catalog circuit notation
D 36 mm
A 58 mm
B 10 mm
L 57 mm
H 44 mm
Ca(N) 5510 N
Coa(N) 11080 N

I denotes lead, Da denotes ball diameter and n is the catalog circuit notation. Keep n exactly as shown; it is not a thread-start count. Ca and Coa are basic dynamic and static load ratings in newtons. They are not a continuous operating-load limit or a promised service life.

Review the nut-to-carriage interface

The PFS drawing is a flanged-nut arrangement. Review D = 36 mm, flange callout A = 58 mm, B = 10 mm, L = 57 mm and H = 44 mm together. The table does not supply every bolt, counterbore, lubrication and mating-fit requirement. Select the correct flange view and confirm a controlled mounting drawing.

The listed L dimension is the nut length, not the working stroke. Specify shaft length, end machining, bearing supports and end clearances separately. Mark the nut orientation and lubrication access in the assembly so that the mounting decision can be checked before ordering.

Confirm the duty before selecting the assembly

Use the 20 mm lead when translating the required linear travel into screw rotation. Lead alone does not establish achievable speed or positioning accuracy. Check screw length, support arrangement, rotational speed, acceleration, axial loading and required service life together.

Provide the external guide arrangement and any side loads or moments on the carriage. Review lubrication, seals and contamination protection for the actual installation. Confirm the raceway manufacturing method, accuracy and preload or clearance of the offered configuration; the catalog heading and model reference are not a stock, delivery or performance commitment.

Questions about PFS2020

How does PFS2020 differ from PFS1620?

d = 20 mm versus 15 for PFS1620; D = 36 mm versus 28 for PFS1620; A = 58 mm versus 48 for PFS1620; H = 44 mm versus 40 for PFS1620; Ca(N) = 5510 N versus 4150 for PFS1620. The listed nut length remains 57 mm while shaft diameter, flange envelope and ratings change. Verify the larger body and flange clearances instead of extending an existing PFS1620 layout by shaft diameter alone.

Can the PFS2020 flange be drilled from these table values alone?

No. A = 58 mm and H = 44 mm are reference callouts, not a complete manufacturing drawing. Confirm the offered flange view, hole pattern, fasteners and mating fits before drilling the bracket.

Does PFS2020 guarantee a particular accuracy or preload?

The model identifies a catalog configuration. Confirm the complete designation, raceway manufacturing method, accuracy class, axial clearance or preload and inspection conditions in the quotation. A model prefix alone does not establish these properties.

What should I send for a PFS2020 quotation?

Specify PFS2020, quantity, working stroke, total shaft length, end-machining drawing, mounting arrangement, axial load cycle, travel speed, acceleration, required life and accuracy. Include lubrication access and the operating environment, and request confirmation of the offered drawing revision.

Request the PFS2020 drawing and configuration

Review the complete ball-screw family tables and drawings for the original notation. Send your layout and duty information through the PFS2020 inquiry page. Ask the quotation to identify the exact assembly, shaft ends, drawing revision and inspection requirements.

Custom requirements

Need help selecting a model or configuration?

This page is a catalog reference. Send the exact model, drawing and load cycle to confirm the offered configuration and commercial terms.

Discuss your application
Product inquiry

Request a quote or engineering review