PCG2020 Rolled Ball Screw
Series / Model PCG2020
Review PCG2020 rolled ball screw dimensions: d 19.4 mm, 20 mm lead and M40x1.5 nut mounting thread. Request the exact drawing and configuration.
Overview
PCG2020 is a PCG threaded-nut reference from the rolled section of the Series Motion ball screw catalog. The row lists d = 19.4 mm and I = 20 mm per revolution. Use the dimensions below to prepare a drawing and configuration review.
Check a shorter nut with the 20 mm lead
PCG2020 lists L = 47 mm, compared with 62 mm for PCG2010. Both rows list D = 45 mm, B = 17 mm and M40x1.5, while the shaft callout, lead, ball diameter, circuit count and ratings differ. The shorter nut can change the initial space review, but working stroke and overall screw length remain separate requirements.
PCG2020 dimensions and basic ratings
| Parameter | Reference | Unit |
|---|---|---|
| Shaft callout d | 19.4 | mm |
| Lead I | 20 | mm/rev |
| Ball diameter Da | 3.5 | mm |
| Number of circuits n | 2 | count |
| Basic dynamic rating Ca | 7110 | N |
| Basic static rating Coa | 10940 | N |
| Nut body D | 45 | mm |
| Nut length L | 47 | mm |
| Drawing callout B | 17 | mm |
| Nut mounting thread A | M40x1.5 | metric thread |
Values retain the printed precision and source symbols. The catalog heading identifies this as a rolled row; the PCG prefix alone is not a manufacturing-process designation. The table is reference data, not a released manufacturing drawing or confirmation of current stock.
Compare the mounting envelope with PCG2010
| Field | PCG2020 | PCG2010 |
|---|---|---|
| d | 19.4 | 19.35 |
| I | 20 | 10 |
| D | 45 | 45 |
| L | 47 | 62 |
| B | 17 | 17 |
| A | M40x1.5 | M40x1.5 |
Use the complete selected row. Similar external dimensions do not establish interchangeability, equivalent load capacity, preload or positioning accuracy. Confirm the mating housing and actual shaft-end geometry before replacement or design release.
Information for configuration review
- Specify PCG2020, rolled process, quantity, required stroke and overall screw length. Include the nut-housing and shaft-end drawings.
- Provide the axial load through the complete cycle, speed, acceleration, mounting direction and required service life. Identify the support arrangement and unsupported length.
- State positioning requirements, permitted axial play, lubrication access and environmental conditions. Ask for the offered accuracy, preload and inspection conditions to be identified in the quotation.
Confirm the supplied configuration, drawing revision, availability and delivery before committing the assembly layout. A catalog basic rating does not replace an application-specific selection calculation.
Questions about PCG2020
What does M40x1.5 mean for PCG2020?
It is the nut mounting-thread designation A. The screw lead is I = 20 mm per revolution. Confirm the mating thread, engagement and retention on the controlled assembly drawing.
Is the 47 mm length the working stroke?
No. L = 47 mm is the catalog nut length. Working stroke, overall screw length, end machining and support positions must be specified separately.
Do the PCG2020 ratings establish the permitted machine load?
No. Ca = 7110 N and Coa = 10940 N are the catalog basic dynamic and static ratings. Selection also requires the load cycle, rating basis, required life, support arrangement and separate static, buckling and speed checks.
Review the source and request a drawing
Check the original PCG catalog row with the drawing and field definitions on PDF page 5. See the 20 mm size table for other catalog configurations. Send a PCG2020 rolled configuration inquiry with the application details and drawing requirements.
