Products

Home›Products

PCG6320 Rolled Ball Screw
Ball Screw Catalog Models

PCG6320 Rolled Ball Screw

Series / Model PCG6320

Review PCG6320 rolled ball screw dimensions: d 62.55 mm, 20 mm lead and M95x2 nut mounting thread. Request the exact drawing and configuration.

Product information

Overview

PCG6320 is a PCG threaded-nut reference from the rolled section of the Series Motion ball screw catalog. The row lists d = 62.55 mm and I = 20 mm per revolution. Use the dimensions below to prepare a drawing and configuration review.

Use the PCG mounting thread and its own ratings

This row pairs d = 62.55 mm with a 20 mm lead, a 100 mm nut body and an M95x2 mounting thread. L = 105 mm refers to the nut, not the complete screw assembly. The catalog lists three circuits, Ca = 67610 N and Coa = 143590 N. These are the PCG6320 values; do not borrow the different ratings or flange dimensions of PFU6320.

PCG6320 dimensions and basic ratings

PCG6320 rolled reference, catalog PDF page 6; units shown by field
Parameter Reference Unit
Shaft callout d 62.55 mm
Lead I 20 mm/rev
Ball diameter Da 9.525 mm
Number of circuits n 3 count
Basic dynamic rating Ca 67610 N
Basic static rating Coa 143590 N
Nut body D 100 mm
Nut length L 105 mm
Drawing callout B 35 mm
Nut mounting thread A M95x2 metric thread

Values retain the printed precision and source symbols. The catalog heading identifies this as a rolled row; the PCG prefix alone is not a manufacturing-process designation. The table is reference data, not a released manufacturing drawing or confirmation of current stock.

Compare the mounting envelope with PCG6310

Catalog comparison: dimensions in mm, I in mm/rev, A as a metric thread designation
Field PCG6320 PCG6310
d 62.55 62.55
I 20 10
D 100 90
L 105 118
B 35 30
A M95x2 M85x2

Use the complete selected row. Similar external dimensions do not establish interchangeability, equivalent load capacity, preload or positioning accuracy. Confirm the mating housing and actual shaft-end geometry before replacement or design release.

Information for configuration review

  • Specify PCG6320, rolled process, quantity, required stroke and overall screw length. Include the nut-housing and shaft-end drawings.
  • Provide the axial load through the complete cycle, speed, acceleration, mounting direction and required service life. Identify the support arrangement and unsupported length.
  • State positioning requirements, permitted axial play, lubrication access and environmental conditions. Ask for the offered accuracy, preload and inspection conditions to be identified in the quotation.

Confirm the supplied configuration, drawing revision, availability and delivery before committing the assembly layout. A catalog basic rating does not replace an application-specific selection calculation.

Questions about PCG6320

What does M95x2 mean for PCG6320?

It is the nut mounting-thread designation A. The screw lead is I = 20 mm per revolution. Confirm the mating thread, engagement and retention on the controlled assembly drawing.

Is the 105 mm length the working stroke?

No. L = 105 mm is the catalog nut length. Working stroke, overall screw length, end machining and support positions must be specified separately.

Do the PCG6320 ratings establish the permitted machine load?

No. Ca = 67610 N and Coa = 143590 N are the catalog basic dynamic and static ratings. Selection also requires the load cycle, rating basis, required life, support arrangement and separate static, buckling and speed checks.

Review the source and request a drawing

Check the original PCG catalog row with the drawing and field definitions on PDF page 5. See the 63 mm size table for other catalog configurations. Send a PCG6320 rolled configuration inquiry with the application details and drawing requirements.

Custom requirements

Need help selecting a model or configuration?

Discuss your application
Product inquiry

Request a quote or engineering review