Products

Home›Products

PFI8020 Rolled Ball Screw
Ball Screw Catalog Models

PFI8020 Rolled Ball Screw

Series / Model PFI8020

Review PFI8020 rolled ball screw dimensions, 20 mm lead and 160 mm nut length. Compare the PFI flange envelope and request a configuration drawing.

Product information

Overview

PFI8020 is a PFI flanged-nut reference in the rolled section of the Series Motion ball screw catalog. Its source row lists d = 80 mm and I = 20 mm per revolution. Use this page to compare the mounting envelope and prepare a drawing-based configuration inquiry.

Allow for the 125 mm body and 160 mm nut length

PFI8020 lists the largest body and flange dimensions in this PFI source group: D = 125 mm, A = 170 mm and W = 145 mm. Against PFI8010, the 20 mm-lead option needs a longer axial pocket as well as a different flange envelope. The table remains catalog-reference data rather than a released assembly drawing.

PFI8020 dimensions and basic ratings

PFI8020 rolled reference, catalog PDF page 10; units shown for each field
Parameter Reference Unit
Shaft callout d 80 mm
Lead I 20 mm/rev
Ball diameter Da 12.7 mm
Number of circuits n 4 count
Basic dynamic rating Ca 141940 N
Basic static rating Coa 321740 N
Nut body callout D 125 mm
Flange callout A 170 mm
Drawing callout B 22 mm
Nut length L 160 mm
Drawing callout W 145 mm

Values retain the printed precision and source symbols. The circuit count n is dimensionless; it is not a thread-start count. Drawing callouts A, B and W belong to the PFI flange geometry, not a nut mounting-thread designation. Check the original drawing on PDF page 9 for the callout positions. Hole details and the offered flange form must be confirmed on the controlled drawing rather than inferred from this table.

Compare PFI8020 with PFI8010

PFI catalog comparison: d, D, A, B, L and W in mm; I in mm/rev
Field PFI8020 PFI8010
d 80 80
I 20 10
D 125 105
A 170 150
B 22 22
L 160 98
W 145 127

Use the complete selected row. Shared dimensions do not establish interchangeability, equivalent preload, accuracy or load performance. Check the nut seat, flange retention, shaft-end geometry and lubrication access together before replacing an assembly or releasing a new design.

Information needed for configuration review

  • Specify PFI8020, rolled process, quantity, required working stroke and overall screw length. Include the mating flange, nut-housing and shaft-end drawings.
  • Provide the axial load through each movement, speed, acceleration, mounting direction, cycles per hour and required service life. State the support arrangement and unsupported screw length.
  • Identify positioning requirements, permitted axial play, lubrication access and environmental conditions. Request the offered accuracy, preload, inspection basis and drawing revision in the quotation.

Catalog inclusion is not confirmation of current stock or an approved application. Confirm the offered configuration, availability and delivery before finalizing the machine layout. Basic ratings are not a substitute for an application-specific selection calculation.

Questions about PFI8020

Is PFI8020 a rolled or ground catalog reference?

This PFI8020 row appears in the Stock Rolled Ball Screw section, on PDF page 10. The PFI prefix is a family label; do not infer process or accuracy from the prefix alone. Confirm the offered process and accuracy on the configuration drawing and quotation.

Does L = 160 mm specify the working stroke?

No. L = 160 mm is the catalog nut length. Required stroke, overall screw length, shaft-end machining and support positions must be supplied separately.

Can the PFI8020 basic ratings be used as the machine working load?

Not directly. Ca = 141940 N and Coa = 321740 N are the printed basic dynamic and static ratings. Selection requires the load cycle, rating basis, target life and separate static, buckling and speed checks.

Check the source and request a drawing

Read the original PFI8020 catalog row and the PFI drawing and field definitions on PDF page 9. The 80 mm size table provides other catalog references. Send a PFI8020 rolled configuration inquiry with the application cycle and mounting requirements.

Custom requirements

Need help selecting a model or configuration?

Discuss your application
Product inquiry

Request a quote or engineering review