PCI2004 Rolled Ball Screw
Series / Model PCI2004
Check PCI2004 rolled ball screw catalog data: 4 mm lead, D 34 mm nut diameter and L 40 mm nut length. Request the configuration drawing.
Overview
PCI2004 is a PCI reference in the Stock Rolled Ball Screw section of the Series Motion catalog. It lists a 4 mm lead, a 34 mm nut body diameter and a 40 mm nut length. Use this row to check the mounting envelope and prepare a configuration inquiry.
Retain the 19.5 mm shaft callout
PCI2004 lists d = 19.5 mm with a 4 mm lead, 34 mm nut diameter and 40 mm nut length. PCI2005 shares the nut diameter but lists d = 19 mm and L = 45 mm. The R callout also changes from 1.5 to 3 mm. Do not derive the shaft dimension by rounding the model code to 20 mm.
PCI2004 dimensions and basic ratings
| Parameter | Reference | Unit |
|---|---|---|
| Shaft callout d | 19.5 | mm |
| Lead I | 4 | mm/rev |
| Ball diameter Da | 2.381 | mm |
| Number of circuits n | 4 | count |
| Basic dynamic rating Ca | 8240 | N |
| Basic static rating Coa | 15960 | N |
| Nut body diameter D | 34 | mm |
| Nut length L | 40 | mm |
| Drawing callout R | 1.5 | mm |
The table keeps the printed symbols and precision. R is a drawing callout, not an inferred mounting tolerance or supplied key size. The family drawing contains additional details not specified by this row; request the controlled drawing for the exact configuration. Catalog reference data does not confirm current stock, accuracy grade or preload.
Compare PCI2004 with PCI2005
| Parameter | PCI2004 | PCI2005 | Unit |
|---|---|---|---|
| Shaft callout d | 19.5 | 19 | mm |
| Lead I | 4 | 5 | mm/rev |
| Ball diameter Da | 2.381 | 3 | mm |
| Number of circuits n | 4 | 4 | count |
| Basic dynamic rating Ca | 8240 | 10920 | N |
| Basic static rating Coa | 15960 | 18960 | N |
| Nut body diameter D | 34 | 34 | mm |
| Nut length L | 40 | 45 | mm |
| Drawing callout R | 1.5 | 3 | mm |
These differences support an initial space and motion review, not a claim of interchangeability. Circuit count n is the catalog ball-circuit notation, not thread-start count. Ratings are not permissible working thrusts, and matching dimensions do not establish equal accuracy, preload or service life.
What to send for a PCI2004 configuration review
- Identify PCI2004, the rolled process, quantity, required stroke and overall screw length. Include the nut housing, shaft-end and support drawings.
- Describe axial load during each movement, speed, acceleration, duty cycle, orientation and target service life. Include unsupported length and support arrangement.
- State positioning needs, allowable axial play, lubrication access and the operating environment. Ask for offered accuracy, preload, inspection conditions and drawing revision to be identified in the quotation.
Confirm the proposed configuration and delivery before committing the design. The catalog heading is the evidence for the rolled designation; the PCI prefix by itself does not identify a manufacturing process.
Questions about PCI2004
What shaft dimension does the catalog list for PCI2004?
The source prints d = 19.5 mm. Retain this value and the exact model designation; do not infer a rounded shaft size from the code. Confirm the controlled drawing and required end machining before ordering.
Is the 40 mm L dimension the travel?
No. L = 40 mm is the catalog nut length. The lead is I = 4 mm per revolution. Specify working stroke, overall screw length and support positions separately.
Can the PCI2004 basic ratings be used as an allowed working load?
Not by themselves. Ca = 8240 N and Coa = 15960 N are catalog basic dynamic and static ratings. Selection needs the load cycle, required life, rating basis, support arrangement, and separate static, buckling and speed checks.
Source drawing and next step
Review the original PCI catalog row and the drawing and field definitions on PDF page 7. The 20 mm size table provides other catalog references. Request a PCI2004 rolled configuration review with the application details and drawing requirements.
