Products

Home›Products

PCI2005 Rolled Ball Screw
Ball Screw Catalog Models

PCI2005 Rolled Ball Screw

Series / Model PCI2005

Check PCI2005 rolled ball screw catalog data: 5 mm lead, D 34 mm nut diameter and L 45 mm nut length. Request the configuration drawing.

Product information

Overview

PCI2005 is a PCI reference in the Stock Rolled Ball Screw section of the Series Motion catalog. It lists a 5 mm lead, a 34 mm nut body diameter and a 45 mm nut length. Use this row to check the mounting envelope and prepare a configuration inquiry.

Check the body growth when moving to 10 mm lead

The 5 mm-lead row uses D = 34 mm and L = 45 mm. PCI2010 uses a 36 mm nut diameter and a 52 mm nut length, with a different shaft callout and circuit count. A housing based on PCI2005 should therefore be rechecked before selecting PCI2010, even though both names are in the 20-series group.

PCI2005 dimensions and basic ratings

PCI2005 rolled reference, PDF page 7; units by field
Parameter Reference Unit
Shaft callout d 19 mm
Lead I 5 mm/rev
Ball diameter Da 3 mm
Number of circuits n 4 count
Basic dynamic rating Ca 10920 N
Basic static rating Coa 18960 N
Nut body diameter D 34 mm
Nut length L 45 mm
Drawing callout R 3 mm

The table keeps the printed symbols and precision. R is a drawing callout, not an inferred mounting tolerance or supplied key size. The family drawing contains additional details not specified by this row; request the controlled drawing for the exact configuration. Catalog reference data does not confirm current stock, accuracy grade or preload.

Compare PCI2005 with PCI2010

Both rows are PCI rolled catalog references; do not mix fields
Parameter PCI2005 PCI2010 Unit
Shaft callout d 19 19.35 mm
Lead I 5 10 mm/rev
Ball diameter Da 3 3.175 mm
Number of circuits n 4 3 count
Basic dynamic rating Ca 10920 9080 N
Basic static rating Coa 18960 14900 N
Nut body diameter D 34 36 mm
Nut length L 45 52 mm
Drawing callout R 3 3 mm

These differences support an initial space and motion review, not a claim of interchangeability. Circuit count n is the catalog ball-circuit notation, not thread-start count. Ratings are not permissible working thrusts, and matching dimensions do not establish equal accuracy, preload or service life.

What to send for a PCI2005 configuration review

  • Identify PCI2005, the rolled process, quantity, required stroke and overall screw length. Include the nut housing, shaft-end and support drawings.
  • Describe axial load during each movement, speed, acceleration, duty cycle, orientation and target service life. Include unsupported length and support arrangement.
  • State positioning needs, allowable axial play, lubrication access and the operating environment. Ask for offered accuracy, preload, inspection conditions and drawing revision to be identified in the quotation.

Confirm the proposed configuration and delivery before committing the design. The catalog heading is the evidence for the rolled designation; the PCI prefix by itself does not identify a manufacturing process.

Questions about PCI2005

What shaft dimension does the catalog list for PCI2005?

The source prints d = 19 mm. Retain this value and the exact model designation; do not infer a rounded shaft size from the code. Confirm the controlled drawing and required end machining before ordering.

Is the 45 mm L dimension the travel?

No. L = 45 mm is the catalog nut length. The lead is I = 5 mm per revolution. Specify working stroke, overall screw length and support positions separately.

Can the PCI2005 basic ratings be used as an allowed working load?

Not by themselves. Ca = 10920 N and Coa = 18960 N are catalog basic dynamic and static ratings. Selection needs the load cycle, required life, rating basis, support arrangement, and separate static, buckling and speed checks.

Source drawing and next step

Review the original PCI catalog row and the drawing and field definitions on PDF page 7. The 20 mm size table provides other catalog references. Request a PCI2005 rolled configuration review with the application details and drawing requirements.

Custom requirements

Need help selecting a model or configuration?

Discuss your application
Product inquiry

Request a quote or engineering review