Products

Home›Products

PCI4040 Rolled Ball Screw
Ball Screw Catalog Models

PCI4040 Rolled Ball Screw

Series / Model PCI4040

Check PCI4040 rolled ball screw catalog data: 40 mm lead, D 68 mm nut diameter and L 70 mm nut length. Request the configuration drawing.

Product information

Overview

PCI4040 is a PCI reference in the Stock Rolled Ball Screw section of the Series Motion catalog. It lists a 40 mm lead, a 68 mm nut body diameter and a 70 mm nut length. Use this row to check the mounting envelope and prepare a configuration inquiry.

A 40 mm lead does not define the working stroke

This row lists both d = 40 mm and I = 40 mm, but they describe different quantities: shaft callout and travel per revolution. L = 70 mm is the nut length. PCI4020 differs in shaft size, lead, body diameter, length and circuit count; use the selected row’s entire specification for layout review.

PCI4040 dimensions and basic ratings

PCI4040 rolled reference, PDF page 8; units by field
Parameter Reference Unit
Shaft callout d 40 mm
Lead I 40 mm/rev
Ball diameter Da 6.35 mm
Number of circuits n 2 count
Basic dynamic rating Ca 22040 N
Basic static rating Coa 40720 N
Nut body diameter D 68 mm
Nut length L 70 mm
Drawing callout R 3 mm

The table keeps the printed symbols and precision. R is a drawing callout, not an inferred mounting tolerance or supplied key size. The family drawing contains additional details not specified by this row; request the controlled drawing for the exact configuration. Catalog reference data does not confirm current stock, accuracy grade or preload.

Compare PCI4040 with PCI4020

Both rows are PCI rolled catalog references; do not mix fields
Parameter PCI4040 PCI4020 Unit
Shaft callout d 40 38 mm
Lead I 40 20 mm/rev
Ball diameter Da 6.35 6 mm
Number of circuits n 2 3 count
Basic dynamic rating Ca 22040 29330 N
Basic static rating Coa 40720 56390 N
Nut body diameter D 68 65 mm
Nut length L 70 90 mm
Drawing callout R 3 3 mm

These differences support an initial space and motion review, not a claim of interchangeability. Circuit count n is the catalog ball-circuit notation, not thread-start count. Ratings are not permissible working thrusts, and matching dimensions do not establish equal accuracy, preload or service life.

What to send for a PCI4040 configuration review

  • Identify PCI4040, the rolled process, quantity, required stroke and overall screw length. Include the nut housing, shaft-end and support drawings.
  • Describe axial load during each movement, speed, acceleration, duty cycle, orientation and target service life. Include unsupported length and support arrangement.
  • State positioning needs, allowable axial play, lubrication access and the operating environment. Ask for offered accuracy, preload, inspection conditions and drawing revision to be identified in the quotation.

Confirm the proposed configuration and delivery before committing the design. The catalog heading is the evidence for the rolled designation; the PCI prefix by itself does not identify a manufacturing process.

Questions about PCI4040

What shaft dimension does the catalog list for PCI4040?

The source prints d = 40 mm. Retain this value and the exact model designation; do not infer a rounded shaft size from the code. Confirm the controlled drawing and required end machining before ordering.

Is the 70 mm L dimension the travel?

No. L = 70 mm is the catalog nut length. The lead is I = 40 mm per revolution. Specify working stroke, overall screw length and support positions separately.

Can the PCI4040 basic ratings be used as an allowed working load?

Not by themselves. Ca = 22040 N and Coa = 40720 N are catalog basic dynamic and static ratings. Selection needs the load cycle, required life, rating basis, support arrangement, and separate static, buckling and speed checks.

Source drawing and next step

Review the original PCI catalog row and the drawing and field definitions on PDF page 7. The 40 mm size table provides other catalog references. Request a PCI4040 rolled configuration review with the application details and drawing requirements.

Custom requirements

Need help selecting a model or configuration?

Discuss your application
Product inquiry

Request a quote or engineering review