PCG0805 Ground Ball Screw
Series / Model PCG0805
Review PCG0805 ground ball screw catalog dimensions: 8 mm screw reference, 5 mm lead and 34 mm nut length. Confirm the assembly drawing.
Overview
PCG0805 is a PCG ground ball screw catalog reference with d = 8 mm, I = 5 mm lead and L = 34 mm nut length. This page follows the “Stock Ground Ball Screw” section of the Series Ball Screw catalog, printed page 16 (PDF page 17). The heading identifies the catalog section, not current inventory or an offered accuracy grade.
PCG0805: the mounting decision
The shared outside envelope with PCG0804 can hide a different travel-per-revolution requirement. Review the motion specification before reusing a housing.
PCG0805 lists I = 5 mm/rev; PCG0804 lists I = 4 mm/rev. PCG0805 lists Ca = 1700 N; PCG0804 lists Ca = 1714 N. PCG0805 lists Coa = 3458 N; PCG0804 lists Coa = 3480 N. This comparison uses ground-section rows. Confirm the process and approved drawing before substitution.
PCG0805 ground catalog dimensions
| Field | Value | Unit or notation |
|---|---|---|
| d | 8 | mm |
| I | 5 | mm/rev |
| Da | 1.588 | mm |
| D | 18 | mm |
| L | 34 | mm |
| L1 | 8 | mm |
| T | M16x1 | thread notation |
| n | 3 | source circuit notation |
| Ca | 1700 | N |
| Coa | 3458 | N |
I denotes lead in millimetres per revolution, Da ball diameter and n the source circuit notation. The n value is not a thread-start count. Dimensions retain the source precision. Ca and Coa are basic load ratings, not a guaranteed operating load or service life.
Review the PCG interface
The PCG ground drawing uses T for the nut mounting thread and L1 for the associated axial callout. For PCG0805, T = M16x1, L1 = 8 mm and D = 18 mm. Check the mating thread, shoulder contact and retention access as one interface. Preserve these ground-section symbols rather than translating them into labels from another process table.
Nut length is separate from working stroke and total shaft length. Add the end bearings, end machining and clearance at both travel limits to the assembly layout. Check installation and lubrication access in the carriage.
Engineering review checklist
- Identify PCG0805, ground process and the required drawing revision in the inquiry.
- Provide stroke, shaft length, support arrangement and shaft-end details.
- State axial load over the cycle, speed, acceleration and desired service life.
- Define positioning requirements, clearance or preload, lubrication and contamination protection.
Use the 5 mm lead to relate linear travel to screw rotation, then check rotational limits for the actual supported length. Check critical speed, buckling, installed accuracy, guides and carriage moments for the complete assembly.
Questions about ground PCG0805
How does ground PCG0805 compare with PCG0804?
PCG0805 lists I = 5 mm/rev; PCG0804 lists I = 4 mm/rev. PCG0805 lists Ca = 1700 N; PCG0804 lists Ca = 1714 N. PCG0805 lists Coa = 3458 N; PCG0804 lists Coa = 3480 N. Use the exact row and process when reviewing the assembly; these differences are not a substitution approval.
Is M16x1 the motion lead of PCG0805?
No. T = M16x1 is the mounting-thread notation. The ball-screw lead is I = 5 mm. Keep mounting-thread fit and travel per revolution as separate requirements in the drawing review.
What does the PCG0805 load rating mean?
Ca = 1700 N and Coa = 3458 N are the catalog basic dynamic and static ratings. They do not specify a permissible continuous operating load. Review the load cycle, support system and required life for the complete assembly.
Request the controlled drawing
Use the ground ball screw family reference and the original catalog, PDF page 17. Send your layout through the PCG0805 ground configuration inquiry. Ask for an approved assembly drawing and confirmation of inspection requirements before releasing the design.
Need help selecting a model or configuration?
Catalog reference only. Confirm the offered assembly and approved drawing.
