Products

Home›Products

PCG2010 Rolled Ball Screw
Ball Screw Catalog Models

PCG2010 Rolled Ball Screw

Series / Model PCG2010

Review PCG2010 rolled ball screw dimensions: d 19.35 mm, 10 mm lead and M40x1.5 nut mounting thread. Request the exact drawing and configuration.

Product information

Overview

PCG2010 is a PCG threaded-nut reference from the rolled section of the Series Motion ball screw catalog. The row lists d = 19.35 mm and I = 10 mm per revolution. Use the dimensions below to prepare a drawing and configuration review.

Preserve the printed 19.35 mm shaft dimension

The PCG2010 row prints d = 19.35 mm. Its 45 mm nut body and M40x1.5 thread are larger than the PCG2005 interface, and L increases to 62 mm. Keep the two decimal places shown in this source. Do not substitute a nearby PFU value or infer the shaft diameter from the 20-series code.

PCG2010 dimensions and basic ratings

PCG2010 rolled reference, catalog PDF page 5; units shown by field
Parameter Reference Unit
Shaft callout d 19.35 mm
Lead I 10 mm/rev
Ball diameter Da 3.175 mm
Number of circuits n 3 count
Basic dynamic rating Ca 9080 N
Basic static rating Coa 14900 N
Nut body D 45 mm
Nut length L 62 mm
Drawing callout B 17 mm
Nut mounting thread A M40x1.5 metric thread

Values retain the printed precision and source symbols. The catalog heading identifies this as a rolled row; the PCG prefix alone is not a manufacturing-process designation. The table is reference data, not a released manufacturing drawing or confirmation of current stock.

Compare the mounting envelope with PCG2020

Catalog comparison: dimensions in mm, I in mm/rev, A as a metric thread designation
Field PCG2010 PCG2020
d 19.35 19.4
I 10 20
D 45 45
L 62 47
B 17 17
A M40x1.5 M40x1.5

Use the complete selected row. Similar external dimensions do not establish interchangeability, equivalent load capacity, preload or positioning accuracy. Confirm the mating housing and actual shaft-end geometry before replacement or design release.

Information for configuration review

  • Specify PCG2010, rolled process, quantity, required stroke and overall screw length. Include the nut-housing and shaft-end drawings.
  • Provide the axial load through the complete cycle, speed, acceleration, mounting direction and required service life. Identify the support arrangement and unsupported length.
  • State positioning requirements, permitted axial play, lubrication access and environmental conditions. Ask for the offered accuracy, preload and inspection conditions to be identified in the quotation.

Confirm the supplied configuration, drawing revision, availability and delivery before committing the assembly layout. A catalog basic rating does not replace an application-specific selection calculation.

Questions about PCG2010

What does M40x1.5 mean for PCG2010?

It is the nut mounting-thread designation A. The screw lead is I = 10 mm per revolution. Confirm the mating thread, engagement and retention on the controlled assembly drawing.

Is the 62 mm length the working stroke?

No. L = 62 mm is the catalog nut length. Working stroke, overall screw length, end machining and support positions must be specified separately.

Do the PCG2010 ratings establish the permitted machine load?

No. Ca = 9080 N and Coa = 14900 N are the catalog basic dynamic and static ratings. Selection also requires the load cycle, rating basis, required life, support arrangement and separate static, buckling and speed checks.

Review the source and request a drawing

Check the original PCG catalog row with the drawing and field definitions on PDF page 5. See the 20 mm size table for other catalog configurations. Send a PCG2010 rolled configuration inquiry with the application details and drawing requirements.

Custom requirements

Need help selecting a model or configuration?

Discuss your application
Product inquiry

Request a quote or engineering review