Products

Home›Products

PCG8020 Rolled Ball Screw
Ball Screw Catalog Models

PCG8020 Rolled Ball Screw

Series / Model PCG8020

Review PCG8020 rolled ball screw dimensions: d 80 mm, 20 mm lead and M130x2 nut mounting thread. Request the exact drawing and configuration.

Product information

Overview

PCG8020 is a PCG threaded-nut reference from the rolled section of the Series Motion ball screw catalog. The row lists d = 80 mm and I = 20 mm per revolution. Use the dimensions below to prepare a drawing and configuration review.

Allow for the 175 mm nut envelope

PCG8020 lists L = 175 mm and D = 135 mm, with an M130x2 mounting thread and B = 40 mm. These callouts are larger than those of PCG8010. Check the full axial package, shoulder, retention and lubrication access before treating the 20 mm lead as a direct upgrade to a 10 mm-lead assembly.

PCG8020 dimensions and basic ratings

PCG8020 rolled reference, catalog PDF page 6; units shown by field
Parameter Reference Unit
Shaft callout d 80 mm
Lead I 20 mm/rev
Ball diameter Da 12.7 mm
Number of circuits n 4 count
Basic dynamic rating Ca 141940 N
Basic static rating Coa 321740 N
Nut body D 135 mm
Nut length L 175 mm
Drawing callout B 40 mm
Nut mounting thread A M130x2 metric thread

Values retain the printed precision and source symbols. The catalog heading identifies this as a rolled row; the PCG prefix alone is not a manufacturing-process designation. The table is reference data, not a released manufacturing drawing or confirmation of current stock.

Compare the mounting envelope with PCG8010

Catalog comparison: dimensions in mm, I in mm/rev, A as a metric thread designation
Field PCG8020 PCG8010
d 80 80
I 20 10
D 135 120
L 175 120
B 40 35
A M130x2 M110x2

Use the complete selected row. Similar external dimensions do not establish interchangeability, equivalent load capacity, preload or positioning accuracy. Confirm the mating housing and actual shaft-end geometry before replacement or design release.

Information for configuration review

  • Specify PCG8020, rolled process, quantity, required stroke and overall screw length. Include the nut-housing and shaft-end drawings.
  • Provide the axial load through the complete cycle, speed, acceleration, mounting direction and required service life. Identify the support arrangement and unsupported length.
  • State positioning requirements, permitted axial play, lubrication access and environmental conditions. Ask for the offered accuracy, preload and inspection conditions to be identified in the quotation.

Confirm the supplied configuration, drawing revision, availability and delivery before committing the assembly layout. A catalog basic rating does not replace an application-specific selection calculation.

Questions about PCG8020

What does M130x2 mean for PCG8020?

It is the nut mounting-thread designation A. The screw lead is I = 20 mm per revolution. Confirm the mating thread, engagement and retention on the controlled assembly drawing.

Is the 175 mm length the working stroke?

No. L = 175 mm is the catalog nut length. Working stroke, overall screw length, end machining and support positions must be specified separately.

Do the PCG8020 ratings establish the permitted machine load?

No. Ca = 141940 N and Coa = 321740 N are the catalog basic dynamic and static ratings. Selection also requires the load cycle, rating basis, required life, support arrangement and separate static, buckling and speed checks.

Review the source and request a drawing

Check the original PCG catalog row with the drawing and field definitions on PDF page 5. See the 80 mm size table for other catalog configurations. Send a PCG8020 rolled configuration inquiry with the application details and drawing requirements.

Custom requirements

Need help selecting a model or configuration?

Discuss your application
Product inquiry

Request a quote or engineering review