Products

Home›Products

PCI1402 Ground Ball Screw
Ball Screw Catalog Models

PCI1402 Ground Ball Screw

Series / Model PCI1402

Review PCI1402 ground ball screw catalog dimensions: 14 mm screw reference, 2 mm lead and 23 mm nut length. Confirm the assembly drawing.

Product information

Overview

PCI1402 is a PCI ground ball screw catalog reference with d = 14 mm, I = 2 mm lead and L = 23 mm nut length. This page follows the “Stock Ground Ball Screw” section of the Series Ball Screw catalog, printed page 17 (PDF page 18). The heading identifies the catalog section, not current inventory or an offered accuracy grade.

PCI1402: the mounting decision

The 14 mm reference combines a 2 mm lead with a short cylindrical body. Check the unlisted retaining features before committing to a compact housing.

PCI1402 lists D = 21 mm; PCI1202 lists D = 20 mm. PCI1402 lists L = 23 mm; PCI1202 lists L = 28 mm. PCI1402 lists Ca = 2200 N; PCI1202 lists Ca = 2100 N. PCI1402 lists Coa = 5700 N; PCI1202 lists Coa = 4900 N. This comparison uses ground-section rows. Confirm the process and approved drawing before substitution.

PCI1402 ground catalog dimensions

PCI1402, ground process, printed page 17
Field Value Unit or notation
d 14 mm
I 2 mm/rev
Da 1.2 mm
L 23 mm
D 21 mm
n 4 source circuit notation
Ca 2200 N
Coa 5700 N

I denotes lead in millimetres per revolution, Da ball diameter and n the source circuit notation. The n value is not a thread-start count. Dimensions retain the source precision. Ca and Coa are basic load ratings, not a guaranteed operating load or service life.

Review the PCI interface

The PCI drawing shows a cylindrical nut with additional retaining and lubrication features. The table establishes D = 21 mm and L = 23 mm, but does not give numerical values for every illustrated callout. Request L1, L2, L3, D1, M and R as applicable on the approved drawing. Do not estimate these features from the image when designing a housing or anti-rotation detail.

Nut length is separate from working stroke and total shaft length. Add the end bearings, end machining and clearance at both travel limits to the assembly layout. Check installation and lubrication access in the carriage.

Engineering review checklist

  • Identify PCI1402, ground process and the required drawing revision in the inquiry.
  • Provide stroke, shaft length, support arrangement and shaft-end details.
  • State axial load over the cycle, speed, acceleration and desired service life.
  • Define positioning requirements, clearance or preload, lubrication and contamination protection.

Use the 2 mm lead to relate linear travel to screw rotation, then check rotational limits for the actual supported length. Check critical speed, buckling, installed accuracy, guides and carriage moments for the complete assembly.

Questions about ground PCI1402

How does ground PCI1402 compare with PCI1202?

PCI1402 lists D = 21 mm; PCI1202 lists D = 20 mm. PCI1402 lists L = 23 mm; PCI1202 lists L = 28 mm. PCI1402 lists Ca = 2200 N; PCI1202 lists Ca = 2100 N. PCI1402 lists Coa = 5700 N; PCI1202 lists Coa = 4900 N. Use the exact row and process when reviewing the assembly; these differences are not a substitution approval.

Are D = 21 mm and L = 23 mm enough to manufacture a PCI1402 housing?

No. They define only part of the catalog envelope. Confirm the retaining features, lubrication connection, tolerances and orientation on the approved assembly drawing before machining.

What does the PCI1402 load rating mean?

Ca = 2200 N and Coa = 5700 N are the catalog basic dynamic and static ratings. They do not specify a permissible continuous operating load. Review the load cycle, support system and required life for the complete assembly.

Request the controlled drawing

Use the ground ball screw family reference and the original catalog, PDF page 18. Send your layout through the PCI1402 ground configuration inquiry. Ask for an approved assembly drawing and confirmation of inspection requirements before releasing the design.

Custom requirements

Need help selecting a model or configuration?

Catalog reference only. Confirm the offered assembly and approved drawing.

Discuss your application
Product inquiry

Request a quote or engineering review