PCI3220 Rolled Ball Screw
Series / Model PCI3220
Check PCI3220 rolled ball screw catalog data: 20 mm lead, D 55 mm nut diameter and L 70 mm nut length. Request the configuration drawing.
Overview
PCI3220 is a PCI reference in the Stock Rolled Ball Screw section of the Series Motion catalog. It lists a 20 mm lead, a 55 mm nut body diameter and a 70 mm nut length. Use this row to check the mounting envelope and prepare a configuration inquiry.
The 20 mm-lead row uses four circuits
PCI3220 has four circuits, a 55 mm nut body and a 70 mm nut length. PCI3232 shares d = 31 mm and Da = 3.969 mm but lists two circuits, D = 50 mm and L = 58 mm. Separate those rows in the design record and verify ratings and mounting details for the intended configuration.
PCI3220 dimensions and basic ratings
| Parameter | Reference | Unit |
|---|---|---|
| Shaft callout d | 31 | mm |
| Lead I | 20 | mm/rev |
| Ball diameter Da | 3.969 | mm |
| Number of circuits n | 4 | count |
| Basic dynamic rating Ca | 19390 | N |
| Basic static rating Coa | 39980 | N |
| Nut body diameter D | 55 | mm |
| Nut length L | 70 | mm |
| Drawing callout R | 3 | mm |
The table keeps the printed symbols and precision. R is a drawing callout, not an inferred mounting tolerance or supplied key size. The family drawing contains additional details not specified by this row; request the controlled drawing for the exact configuration. Catalog reference data does not confirm current stock, accuracy grade or preload.
Compare PCI3220 with PCI3232
| Parameter | PCI3220 | PCI3232 | Unit |
|---|---|---|---|
| Shaft callout d | 31 | 31 | mm |
| Lead I | 20 | 32 | mm/rev |
| Ball diameter Da | 3.969 | 3.969 | mm |
| Number of circuits n | 4 | 2 | count |
| Basic dynamic rating Ca | 19390 | 10580 | N |
| Basic static rating Coa | 39980 | 20260 | N |
| Nut body diameter D | 55 | 50 | mm |
| Nut length L | 70 | 58 | mm |
| Drawing callout R | 3 | 3 | mm |
These differences support an initial space and motion review, not a claim of interchangeability. Circuit count n is the catalog ball-circuit notation, not thread-start count. Ratings are not permissible working thrusts, and matching dimensions do not establish equal accuracy, preload or service life.
What to send for a PCI3220 configuration review
- Identify PCI3220, the rolled process, quantity, required stroke and overall screw length. Include the nut housing, shaft-end and support drawings.
- Describe axial load during each movement, speed, acceleration, duty cycle, orientation and target service life. Include unsupported length and support arrangement.
- State positioning needs, allowable axial play, lubrication access and the operating environment. Ask for offered accuracy, preload, inspection conditions and drawing revision to be identified in the quotation.
Confirm the proposed configuration and delivery before committing the design. The catalog heading is the evidence for the rolled designation; the PCI prefix by itself does not identify a manufacturing process.
Questions about PCI3220
What shaft dimension does the catalog list for PCI3220?
The source prints d = 31 mm. Retain this value and the exact model designation; do not infer a rounded shaft size from the code. Confirm the controlled drawing and required end machining before ordering.
Is the 70 mm L dimension the travel?
No. L = 70 mm is the catalog nut length. The lead is I = 20 mm per revolution. Specify working stroke, overall screw length and support positions separately.
Can the PCI3220 basic ratings be used as an allowed working load?
Not by themselves. Ca = 19390 N and Coa = 39980 N are catalog basic dynamic and static ratings. Selection needs the load cycle, required life, rating basis, support arrangement, and separate static, buckling and speed checks.
Source drawing and next step
Review the original PCI catalog row and the drawing and field definitions on PDF page 7. The 32 mm size table provides other catalog references. Request a PCI3220 rolled configuration review with the application details and drawing requirements.
