Products

Home›Products

PFI2010 Ball Screw
Ball Screw Catalog Models

PFI2010 Ball Screw

Series / Model PFI2010

Review PFI2010 ball screw dimensions: d = 19.35 mm, 10 mm lead and L = 54 mm. Compare the nut interface and request a drawing review.

Product information

Overview

PFI2010 is a PFI ball-screw catalog reference with d = 19.35 mm and I = 10 mm lead. This page supports a model-specific drawing and quotation review, with published dimensions and a comparison to PFI2005.

Review the 60 mm flange and 54 mm nut length for 10 mm lead

The 10 mm lead reference changes the listed shaft diameter, nut body and flange callouts from PFI2005. Retain d = 19.35 mm and obtain a drawing for the exact offered assembly.

d = 19.35 mm versus 19 for PFI2005; I = 10 mm versus 5 for PFI2005; D = 36 mm versus 34 for PFI2005; A = 60 mm versus 57 for PFI2005; W = 46 mm versus 45 for PFI2005. These are catalog comparisons, not an interchangeability approval. Check the entire assembly whenever the screw or nut model changes.

PFI2010 dimensions and basic load ratings

PFI2010 catalog reference, Series Ball Screw, printed page 8
Drawing field Value Unit or notation
d 19.35 mm
I 10 mm
Da 3.175 mm
n 3 catalog circuit notation
Ca(N) 9080 N
Coa(N) 14900 N
D 36 mm
A 60 mm
B 11 mm
L 54 mm
W 46 mm

I denotes lead, Da denotes ball diameter and n is the catalog circuit notation. Keep n exactly as shown; it is not a thread-start count. Ca and Coa are basic dynamic and static load ratings in newtons. They are not a continuous operating-load limit or a promised service life.

Review the nut-to-carriage interface

The PFI drawing is a flanged-nut arrangement. Review D = 36 mm, flange callout A = 60 mm, B = 11 mm, L = 54 mm and W = 46 mm together. The table does not supply every bolt, counterbore, lubrication and mating-fit requirement. Select the correct flange view and confirm a controlled mounting drawing.

The listed L dimension is the nut length, not the working stroke. Specify shaft length, end machining, bearing supports and end clearances separately. Mark the nut orientation and lubrication access in the assembly so that the mounting decision can be checked before ordering.

Confirm the duty before selecting the assembly

Use the 10 mm lead when translating the required linear travel into screw rotation. Lead alone does not establish achievable speed or positioning accuracy. Check screw length, support arrangement, rotational speed, acceleration, axial loading and required service life together.

Provide the external guide arrangement and any side loads or moments on the carriage. Review lubrication, seals and contamination protection for the actual installation. Confirm the raceway manufacturing method, accuracy and preload or clearance of the offered configuration; the catalog heading and model reference are not a stock, delivery or performance commitment.

Questions about PFI2010

How does PFI2010 differ from PFI2005?

d = 19.35 mm versus 19 for PFI2005; I = 10 mm versus 5 for PFI2005; D = 36 mm versus 34 for PFI2005; A = 60 mm versus 57 for PFI2005; W = 46 mm versus 45 for PFI2005. The 10 mm lead reference changes the listed shaft diameter, nut body and flange callouts from PFI2005. Retain d = 19.35 mm and obtain a drawing for the exact offered assembly.

Can the PFI2010 flange be drilled from these table values alone?

No. A = 60 mm and W = 46 mm are reference callouts, not a complete manufacturing drawing. Confirm the offered flange view, hole pattern, fasteners and mating fits before drilling the bracket.

Does PFI2010 guarantee a particular accuracy or preload?

The model identifies a catalog configuration. Confirm the complete designation, raceway manufacturing method, accuracy class, axial clearance or preload and inspection conditions in the quotation. A model prefix alone does not establish these properties.

What should I send for a PFI2010 quotation?

Specify PFI2010, quantity, working stroke, total shaft length, end-machining drawing, mounting arrangement, axial load cycle, travel speed, acceleration, required life and accuracy. Include lubrication access and the operating environment, and request confirmation of the offered drawing revision.

Request the PFI2010 drawing and configuration

Review the complete ball-screw family tables and drawings for the original notation. Send your layout and duty information through the PFI2010 inquiry page. Ask the quotation to identify the exact assembly, shaft ends, drawing revision and inspection requirements.

Custom requirements

Need help selecting a model or configuration?

This page is a catalog reference. Send the exact model, drawing and load cycle to confirm the offered configuration and commercial terms.

Discuss your application
Product inquiry

Request a quote or engineering review