Products

Home›Products

PFS3232 Ball Screw
Ball Screw Catalog Models

PFS3232 Ball Screw

Series / Model PFS3232

Review PFS3232 ball screw dimensions: d = 31 mm, 32 mm lead and L = 90 mm. Compare the nut interface and request a drawing review.

Product information

Overview

PFS3232 is a PFS ball-screw catalog reference with d = 31 mm and I = 32 mm lead. This page supports a model-specific drawing and quotation review, with published dimensions and a comparison to PFS2525.

Package a 32 mm lead with the 80 mm flange reference

This step changes flange width, thickness and nut length along with lead. The source diagram includes size-dependent flange views, so select the applicable controlled drawing rather than enlarging a smaller bolt pattern.

d = 31 mm versus 24.1 for PFS2525; I = 32 mm versus 25 for PFS2525; A = 80 mm versus 62 for PFS2525; B = 13 mm versus 12 for PFS2525; L = 90 mm versus 70 for PFS2525. These are catalog comparisons, not an interchangeability approval. Check the entire assembly whenever the screw or nut model changes.

PFS3232 dimensions and basic load ratings

PFS3232 catalog reference, Series Ball Screw, printed page 11
Drawing field Value Unit or notation
d 31 mm
I 32 mm
Da 3.969 mm
n 1.8×1 catalog circuit notation
D 50 mm
A 80 mm
B 13 mm
L 90 mm
H 62 mm
Ca(N) 12570 N
Coa(N) 34260 N

I denotes lead, Da denotes ball diameter and n is the catalog circuit notation. Keep n exactly as shown; it is not a thread-start count. Ca and Coa are basic dynamic and static load ratings in newtons. They are not a continuous operating-load limit or a promised service life.

Review the nut-to-carriage interface

The PFS drawing is a flanged-nut arrangement. Review D = 50 mm, flange callout A = 80 mm, B = 13 mm, L = 90 mm and H = 62 mm together. The table does not supply every bolt, counterbore, lubrication and mating-fit requirement. Select the correct flange view and confirm a controlled mounting drawing.

The listed L dimension is the nut length, not the working stroke. Specify shaft length, end machining, bearing supports and end clearances separately. Mark the nut orientation and lubrication access in the assembly so that the mounting decision can be checked before ordering.

Confirm the duty before selecting the assembly

Use the 32 mm lead when translating the required linear travel into screw rotation. Lead alone does not establish achievable speed or positioning accuracy. Check screw length, support arrangement, rotational speed, acceleration, axial loading and required service life together.

Provide the external guide arrangement and any side loads or moments on the carriage. Review lubrication, seals and contamination protection for the actual installation. Confirm the raceway manufacturing method, accuracy and preload or clearance of the offered configuration; the catalog heading and model reference are not a stock, delivery or performance commitment.

Questions about PFS3232

How does PFS3232 differ from PFS2525?

d = 31 mm versus 24.1 for PFS2525; I = 32 mm versus 25 for PFS2525; A = 80 mm versus 62 for PFS2525; B = 13 mm versus 12 for PFS2525; L = 90 mm versus 70 for PFS2525. This step changes flange width, thickness and nut length along with lead. The source diagram includes size-dependent flange views, so select the applicable controlled drawing rather than enlarging a smaller bolt pattern.

Can the PFS3232 flange be drilled from these table values alone?

No. A = 80 mm and H = 62 mm are reference callouts, not a complete manufacturing drawing. Confirm the offered flange view, hole pattern, fasteners and mating fits before drilling the bracket.

Does PFS3232 guarantee a particular accuracy or preload?

The model identifies a catalog configuration. Confirm the complete designation, raceway manufacturing method, accuracy class, axial clearance or preload and inspection conditions in the quotation. A model prefix alone does not establish these properties.

What should I send for a PFS3232 quotation?

Specify PFS3232, quantity, working stroke, total shaft length, end-machining drawing, mounting arrangement, axial load cycle, travel speed, acceleration, required life and accuracy. Include lubrication access and the operating environment, and request confirmation of the offered drawing revision.

Request the PFS3232 drawing and configuration

Review the complete ball-screw family tables and drawings for the original notation. Send your layout and duty information through the PFS3232 inquiry page. Ask the quotation to identify the exact assembly, shaft ends, drawing revision and inspection requirements.

Custom requirements

Need help selecting a model or configuration?

This page is a catalog reference. Send the exact model, drawing and load cycle to confirm the offered configuration and commercial terms.

Discuss your application
Product inquiry

Request a quote or engineering review