Products

Home›Products

PFU0502 Rolled Miniature Ball Screw
Miniature Ball Screw

PFU0502 Rolled Miniature Ball Screw

Series / Model PFU0502

Compare PFU0502 rolled ball screw dimensions: 5 mm shaft, 2 mm lead and 16 mm nut length. Send the mounting and shaft-end drawing for quotation review.

Product information

Overview

PFU0502 is a rolled ball screw catalog reference with a 5 mm shaft and 2 mm travel per revolution. The row retains a compact D = 10 mm and A = 20 mm nut package, but its listed nut length L is 16 mm. Check that axial envelope before carrying over a mounting arrangement from another small PFU model.

Published catalog reference

PFU0502 – rolled catalog reference
Characteristic Value Unit or notation
Nominal shaft diameter d 5 mm
Lead I 2 mm/rev
Ball diameter Da 1.2 mm
Circuit notation n 3 catalog notation
Basic dynamic load rating Ca 660 N
Basic static load rating Coa 1052 N
Nut body dimension D 10 mm
Flange dimension A 20 mm
Dimension B 3 mm
Nut length L 16 mm
Dimension W 15 mm
Dimension H 14 mm
Dimension X 2.9 mm

Ca and Coa are the catalog basic dynamic and static load ratings in N. They are not a blanket permissible operating load. The source row and the matching rolled PDF row agree, but this reference table is not an ordering or shaft-end machining drawing.

Account for the longer nut on the 5 mm row

The adjacent PFU0501 row has the same nominal shaft diameter, D and A, with a 12 mm nut length and 1 mm lead. PFU0502 therefore needs a separate axial-space review even where the bracket appears to fit the same flange outline. Include bolt access, nearby stops and the portion of the screw that remains usable at each end of travel.

A 2 mm lead describes a geometric travel relationship. It does not set the operating speed, thrust, service life or resolution of the assembled axis. Use the intended travel cycle, support spacing and actual end interfaces when reviewing the drive. If comparing with the published PFU0802, note that its shaft is 8 mm; equal lead does not identify the same mechanical package.

Specify the complete installation

For PFU0502, show the 16 mm nut-length allowance and the available clearance around the flange. Specify the shaft ends and supports as part of the same assembly request, including quantity and required travel.

Confirm total length, usable stroke, shaft ends, supports and the nut mounting interface as one assembly. State the required travel accuracy, axial play or preload, lubrication and environment. This page does not assign an accuracy grade, preload option, stock status, price or delivery date.

Questions about PFU0502

Can a PFU0501 bracket be reused for PFU0502?

The rows share several main dimensions, but PFU0502 has a longer listed nut. Check every mounting dimension, the full nut envelope and the controlled drawing before reusing the bracket; no drop-in fit is established by this table.

Is PFU0502 equivalent to PFU0802 because both have 2 mm lead?

No. PFU0502 lists a 5 mm shaft and PFU0802 lists 8 mm. Lead is only one field. Nut dimensions, rating values, shaft-end details and the required support arrangement must also be compared.

Do the PFU dimension and rating rows confirm an accuracy grade?

No accuracy grade, preload or axial-play configuration is assigned by this row. State the required travel accuracy and inspection conditions, then confirm the offered configuration on the quotation and controlled drawing.

What is needed to quote PFU0502 as a complete assembly?

Send the exact rolled model, quantity, total length, usable stroke, shaft-end and nut-mounting drawing, supports, load and speed cycle, lubrication and environment requirements. Confirm the offered drawing revision and commercial terms before ordering.

Request PFU0502 quotation review

Compare the Rolled miniature ball screw family table and the existing PFU0401 Rolled Miniature Ball Screw reference. Send the selected model and installation details through the PFU0502 inquiry page so the offered configuration can be identified.

Custom requirements

Need help selecting a model or configuration?

Send the exact model, assembly drawing and load cycle. Confirm the offered configuration, drawing revision and inspection basis with the quotation.

Discuss your application
Product inquiry

Request a quote or engineering review