PFU1002 Rolled Ball Screw
Series / Model PFU1002
Review PFU1002 rolled ball screw data: 10 mm shaft, 2 mm lead and 28 mm nut length. Compare the exact row and mounting interfaces before quotation.
Overview
PFU1002 is listed in the Series Motion rolled PFU table with a 10 mm shaft and 2 mm lead. This page brings the exact source row together with mounting and configuration checks for an inquiry.
Check the flange pattern beyond the shared 18 mm nut body
PFU1002 lists a 10 mm shaft, 2 mm lead and 28 mm nut length. Its nut body D is 18 mm, the same D value listed for PFU0805, but the flange A increases from 31 to 35 mm and X from 3.4 to 4.5 mm. Matching nut-body diameter does not establish bracket compatibility.
The 2 mm lead is also a distinct motion requirement from the 5 mm PFU0805 entry. Keep the lead, flange dimensions and shaft-end design together when reviewing a compact replacement. Confirm the full support and coupling arrangement rather than treating the 10 mm shaft as the only interface change.
Published rolled catalog reference
| Reference field | Value | Unit or notation |
|---|---|---|
| Shaft diameter d | 10 | mm |
| Lead I | 2 | mm/rev |
| Ball diameter Da | 1.2 | mm |
| Circuit notation n | 3 | catalog notation |
| Basic dynamic load rating Ca | 1455 | N |
| Basic static load rating Coa | 3275 | N |
| Nut body D | 18 | mm |
| Flange A | 35 | mm |
| Dimension B | 5 | mm |
| Nut length L | 28 | mm |
| Dimension W | 27 | mm |
| Dimension H | 22 | mm |
| Dimension X | 4.5 | mm |
The values above agree between the published rolled-family HTML row and physical page 3 of the company Ball Screw catalog (printed Ball Screw-2). Keep the source drawing with the dimensional letters. Ca and Coa are catalog basic load ratings in N, not recommended working loads or a simultaneous operating envelope.
Keep the process and complete assembly explicit
PFU identifies a nut configuration; it does not by itself establish rolled versus ground manufacture, an accuracy grade or a supplied preload. This reference uses the rolled table specifically. Preserve any suffix and distinguish the screw lead from ball-circuit notation when preparing the order description.
Review shaft ends, supports, nut mounting and the moving envelope together. Include the whole load and motion cycle rather than a single maximum speed or force. Lubrication, environmental protection and acceptance measurements should be agreed for the offered assembly. Catalog inclusion does not confirm current stock, price or delivery time.
Questions about PFU1002
What distinguishes the PFU1002 reference?
PFU1002 lists a 10 mm shaft, 2 mm lead and 28 mm nut length. Its nut body D is 18 mm, the same D value listed for PFU0805, but the flange A increases from 31 to 35 mm and X from 3.4 to 4.5 mm. Matching nut-body diameter does not establish bracket compatibility.
Does the PFU1002 row specify travel accuracy or preload?
The dimensions and load ratings do not assign a complete accuracy or preload configuration. State the required positioning accuracy, axial play or preload and inspection conditions, then confirm the offered assembly designation and drawing.
Is L = 28 mm the PFU1002 working stroke?
No. L is the nut-length dimension. Working stroke, total shaft length, end machining, bearing supports and end clearances need their own assembly drawing.
What information is required for a PFU1002 quotation?
Include the exact rolled model and any suffix, quantity, shaft length and end drawing, usable stroke, nut mounting layout, support arrangement, load and speed cycle, lubrication, environment and accuracy requirement. Ask for confirmation of the offered configuration and commercial terms.
Compare the source and send an inquiry
Open the rolled miniature ball screw family table and the PFU0805 Rolled Miniature Ball Screw reference. Send the exact model and installation drawing through the PFU1002 inquiry page for configuration review.
Need help selecting a model or configuration?
This page is a catalog reference. Send the exact model, drawing and load cycle to confirm the offered configuration and commercial terms.
