PYFU2010 Ground Ball Screw
Series / Model PYFU2010
Review PYFU2010 ground ball screw catalog dimensions: 20 mm screw reference, 10 mm lead and 117 mm nut length. Confirm the assembly drawing.
Overview
PYFU2010 is a PYFU ground ball screw catalog reference with d = 20 mm, I = 10 mm lead and L = 117 mm nut length. This page follows the “Stock Ground Ball Screw” section of the Series Ball Screw catalog, printed page 18 (PDF page 19). The heading identifies the catalog section, not current inventory or an offered accuracy grade.
PYFU2010: the mounting decision
The 10 mm lead and 36 mm body diameter must be reviewed alongside the 117 mm nut length. Compare the axial package with PFU2010 before choosing the carriage layout.
PYFU2010 lists L = 117 mm; PFU2010 lists L = 53 mm. This comparison uses ground-section rows. Confirm the process and approved drawing before substitution.
PYFU2010 ground catalog dimensions
| Field | Value | Unit or notation |
|---|---|---|
| d | 20 | mm |
| I | 10 | mm/rev |
| Da | 3.175 | mm |
| D | 36 | mm |
| A | 58 | mm |
| B | 10 | mm |
| M | 12 | mm |
| L | 117 | mm |
| H | 44 | mm |
| n | 3 | source circuit notation |
| Ca | 9340 | N |
| Coa | 15800 | N |
I denotes lead in millimetres per revolution, Da ball diameter and n the source circuit notation. The n value is not a thread-start count. Dimensions retain the source precision. Ca and Coa are basic load ratings, not a guaranteed operating load or service life.
Review the PYFU interface
The PYFU drawing shows the extended nut arrangement. For PYFU2010, retain A = 58 mm, B = 10 mm, M = 12 mm and H = 44 mm in the layout review. The table does not supply every drawing callout, including a complete fastening and lubrication specification. Request those details on the approved drawing. The illustration alone does not establish the preload setting of an offered assembly.
Nut length is separate from working stroke and total shaft length. Add the end bearings, end machining and clearance at both travel limits to the assembly layout. Check installation and lubrication access in the carriage.
Engineering review checklist
- Identify PYFU2010, ground process and the required drawing revision in the inquiry.
- Provide stroke, shaft length, support arrangement and shaft-end details.
- State axial load over the cycle, speed, acceleration and desired service life.
- Define positioning requirements, clearance or preload, lubrication and contamination protection.
Use the 10 mm lead to relate linear travel to screw rotation, then check rotational limits for the actual supported length. Check critical speed, buckling, installed accuracy, guides and carriage moments for the complete assembly.
Questions about ground PYFU2010
How does ground PYFU2010 compare with PFU2010?
PYFU2010 lists L = 117 mm; PFU2010 lists L = 53 mm. Use the exact row and process when reviewing the assembly; these differences are not a substitution approval.
Can PYFU2010 replace PFU2010 in the same axial space?
The catalog lists L = 117 mm for PYFU2010 and L = 53 mm for PFU2010. Review the complete envelope and fastening arrangement; shared lead or basic ratings do not establish interchangeability.
What does the PYFU2010 load rating mean?
Ca = 9340 N and Coa = 15800 N are the catalog basic dynamic and static ratings. They do not specify a permissible continuous operating load. Review the load cycle, support system and required life for the complete assembly.
Request the controlled drawing
Use the ground ball screw family reference and the original catalog, PDF page 19. Send your layout through the PYFU2010 ground configuration inquiry. Ask for an approved assembly drawing and confirmation of inspection requirements before releasing the design.
Need help selecting a model or configuration?
Catalog reference only. Confirm the offered assembly and approved drawing.
