Products

Home›Products

PYFU3205 Ground Ball Screw
Ball Screw Catalog Models

PYFU3205 Ground Ball Screw

Series / Model PYFU3205

Review PYFU3205 ground ball screw catalog dimensions: 32 mm screw reference, 5 mm lead and 102 mm nut length. Confirm the assembly drawing.

Product information

Overview

PYFU3205 is a PYFU ground ball screw catalog reference with d = 32 mm, I = 5 mm lead and L = 102 mm nut length. This page follows the “Stock Ground Ball Screw” section of the Series Ball Screw catalog, printed page 18 (PDF page 19). The heading identifies the catalog section, not current inventory or an offered accuracy grade.

PYFU3205: the mounting decision

The 5 mm lead and 50 mm body diameter must be reviewed alongside the 102 mm nut length. Compare the axial package with PFU3205 before choosing the carriage layout.

PYFU3205 lists L = 102 mm; PFU3205 lists L = 52 mm. This comparison uses ground-section rows. Confirm the process and approved drawing before substitution.

PYFU3205 ground catalog dimensions

PYFU3205, ground process, printed page 18
Field Value Unit or notation
d 32 mm
I 5 mm/rev
Da 3.175 mm
D 50 mm
A 80 mm
B 12 mm
M 15 mm
L 102 mm
H 62 mm
n 4 source circuit notation
Ca 14950 N
Coa 34390 N

I denotes lead in millimetres per revolution, Da ball diameter and n the source circuit notation. The n value is not a thread-start count. Dimensions retain the source precision. Ca and Coa are basic load ratings, not a guaranteed operating load or service life.

Review the PYFU interface

The PYFU drawing shows the extended nut arrangement. For PYFU3205, retain A = 80 mm, B = 12 mm, M = 15 mm and H = 62 mm in the layout review. The table does not supply every drawing callout, including a complete fastening and lubrication specification. Request those details on the approved drawing. The illustration alone does not establish the preload setting of an offered assembly.

Nut length is separate from working stroke and total shaft length. Add the end bearings, end machining and clearance at both travel limits to the assembly layout. Check installation and lubrication access in the carriage.

Engineering review checklist

  • Identify PYFU3205, ground process and the required drawing revision in the inquiry.
  • Provide stroke, shaft length, support arrangement and shaft-end details.
  • State axial load over the cycle, speed, acceleration and desired service life.
  • Define positioning requirements, clearance or preload, lubrication and contamination protection.

Use the 5 mm lead to relate linear travel to screw rotation, then check rotational limits for the actual supported length. Check critical speed, buckling, installed accuracy, guides and carriage moments for the complete assembly.

Questions about ground PYFU3205

How does ground PYFU3205 compare with PFU3205?

PYFU3205 lists L = 102 mm; PFU3205 lists L = 52 mm. Use the exact row and process when reviewing the assembly; these differences are not a substitution approval.

Can PYFU3205 replace PFU3205 in the same axial space?

The catalog lists L = 102 mm for PYFU3205 and L = 52 mm for PFU3205. Review the complete envelope and fastening arrangement; shared lead or basic ratings do not establish interchangeability.

What does the PYFU3205 load rating mean?

Ca = 14950 N and Coa = 34390 N are the catalog basic dynamic and static ratings. They do not specify a permissible continuous operating load. Review the load cycle, support system and required life for the complete assembly.

Request the controlled drawing

Use the ground ball screw family reference and the original catalog, PDF page 19. Send your layout through the PYFU3205 ground configuration inquiry. Ask for an approved assembly drawing and confirmation of inspection requirements before releasing the design.

Custom requirements

Need help selecting a model or configuration?

Catalog reference only. Confirm the offered assembly and approved drawing.

Discuss your application
Product inquiry

Request a quote or engineering review