Products

Home›Products

PFU0808 Rolled Miniature Ball Screw
Miniature Ball Screw

PFU0808 Rolled Miniature Ball Screw

Series / Model PFU0808

Review PFU0808 rolled ball screw data: 8 mm diameter, 8 mm lead and 20 mm nut length. Compare adjacent lead options and send the mounting layout for review.

Product information

Overview

PFU0808 is the rolled reference with an 8 mm nominal diameter and an 8 mm lead. The table lists D = 18 mm, L = 20 mm, Ca = 2,200 N and Coa = 3,800 N. Use the short listed nut length as a dimensional input, not as proof of a complete axis stroke or speed capability.

Verified rolled catalog reference

PFU0808 — rolled reference
Characteristic Value Unit
Nominal shaft diameter d 8 mm
Lead I 8 mm/rev
Ball diameter Da 1.5875 mm
Circuit notation n (as printed) 1.6*2 —
Basic dynamic rating Ca 2200 N
Basic static rating Coa 3800 N
Nut body D 18 mm
Flange dimension A 31 mm
Flange thickness B 4 mm
Nut length L 20 mm
Drawing dimension W 25 mm
Drawing dimension H 20 mm
Drawing dimension X 3.4 mm

Read physical PDF page 3 of the Series Ball Screw Catalog. Preserve the source drawing labels and obtain a controlled assembly drawing for manufacturing and inspection.

Compare the high-lead nut envelope

A is 31 mm and B is 4 mm for this row, with W = 25 mm and H = 20 mm. The available flange and carriage space should be checked alongside the moving nut positions. Identify external guides and the actual point of axial load application rather than assigning every carriage load to the screw.

Compare the complete reference

Related rolled references
Model d (mm) Lead (mm/rev) D (mm) A (mm) B (mm) L (mm) Ca (N) Coa (N)
PFU0808 8 8 18 31 4 20 2200 3800
PFU0805 8 5 18 31 4 28 1700 3458
PFU0810 8 10 18 31 4 25 2200 3800

The 8 mm-diameter PFU0805 has a 5 mm lead and 28 mm nut length, while PFU0810 has a 10 mm lead and 25 mm length. Both list an 18 mm body D. The common body diameter does not make their lead, axial envelope or load ratings interchangeable.

Plan the motion and acceptance boundary

At an illustrative 600 rpm, the 8 mm lead yields 80 mm/s kinematically. A 40 mm travel requires five shaft revolutions. The required acceleration, reversing cycle and actual allowed screw speed still belong in the configuration review.

State the required travel accuracy, reversal behavior and inspection basis separately from nominal lead. The dimension row does not assign an available C3, C5 or C7 grade, preload, stock length or delivery condition.

Frequently asked questions

Does n = 1.6*2 establish two starts?

No. The source labels the field as circuit notation. It must not be used as a thread-start count or substituted for the stated 8 mm lead.

Can an 18 mm nut locating bore settle the variant choice?

No. PFU0805, PFU0808 and PFU0810 share the listed body D but differ in lead and nut length, and some ratings differ. Check the complete mounting and motion requirements.

Which drawing details should accompany this model request?

Provide the full model and rolled process reference, total length and usable stroke, shaft ends, support arrangement, nut mounting, force/speed cycle, lubrication and environment. Identify the required accuracy or axial-play acceptance method.

Discuss your configuration

Send the exact model, operating cycle and assembly drawing. Ask for the offered configuration and drawing revision to be confirmed together.

Send your application requirements

Supporting product and drawing information

Rolled miniature ball screw family · Shaft-end drawing inputs · Nut mounting inputs

Custom requirements

Need help selecting a model or configuration?

Send the exact model, matching assembly scope and installation drawing. Confirm the offered dimensions, accuracy or clearance and inspection basis with the quotation.

Discuss your application
Product inquiry

Request a quote or engineering review