Products

Home›Products

PFU1205 Rolled Miniature Ball Screw
Miniature Ball Screw

PFU1205 Rolled Miniature Ball Screw

Series / Model PFU1205

Check PFU1205 rolled ball screw data: 12 mm diameter and 5 mm lead. Distinguish PFU1205w, compare the nut dimensions and send your mounting drawing for review.

Product information

Overview

PFU1205 is the rolled table reference with a 12 mm nominal shaft diameter and 5 mm lead. Its nut body D is 22 mm, flange A is 37 mm and nut length L is 39 mm. The basic static rating Coa = 9,000 N is not an allowable compressive force for every installed shaft.

Verified rolled catalog reference

PFU1205 — rolled reference
Characteristic Value Unit
Nominal shaft diameter d 12 mm
Lead I 5 mm/rev
Ball diameter Da 2.5 mm
Circuit notation n (as printed) 3 —
Basic dynamic rating Ca 4400 N
Basic static rating Coa 9000 N
Nut body D 22 mm
Flange dimension A 37 mm
Flange thickness B 8 mm
Nut length L 39 mm
Drawing dimension W 29 mm
Drawing dimension H 24 mm
Drawing dimension X 4.5 mm

Read physical PDF page 3 of the Series Ball Screw Catalog. Preserve the source drawing labels and obtain a controlled assembly drawing for manufacturing and inspection.

Keep the plain and w mounting references separate

For plain PFU1205, B is 8 mm, W is 29 mm and H is 24 mm. Show how the nut flange seats in the carriage and how axial load reaches the shaft supports. Side loads, moments and the shaft compression span need their own review; a larger nut rating does not establish those capacities.

Compare the complete reference

Related rolled references
Model d (mm) Lead (mm/rev) D (mm) A (mm) B (mm) L (mm) Ca (N) Coa (N)
PFU1205 12 5 22 37 8 39 4400 9000
PFU1202 12 2 20 37 5 28 2100 4900
PFU1205w 11.4 5 24 40 10 40 4930 7440

The PFU1205w row uses an 11.4 mm nominal shaft diameter, 24 mm body D, 40 mm flange A and 40 mm nut length L. PFU1202 instead has a 2 mm lead, 20 mm body D and 28 mm nut length. The suffix and lead choice change several mating dimensions, not just the catalog rating.

Plan the motion and acceptance boundary

A hypothetical 300 rpm produces 25 mm/s with a 5 mm lead. A 50 mm travel requires ten revolutions before the acceleration profile is applied. Confirm the actual permissible rotating speed and the entire duty cycle rather than treating this example as an operating limit.

State the required travel accuracy, reversal behavior and inspection basis separately from nominal lead. The dimension row does not assign an available C3, C5 or C7 grade, preload, stock length or delivery condition.

Frequently asked questions

Is the w version another name for PFU1205?

No. PFU1205w has a different nominal shaft diameter, nut envelope and ratings in the rolled table. Keep the full suffix and reference drawing when comparing or replacing it.

Does Coa = 9,000 N establish shaft buckling capacity?

No. Coa is the basic static rating of the stated catalog reference. Shaft compression depends on the loaded segment, root diameter, supports and applicable calculation method.

Which drawing details should accompany this model request?

Provide the full model and rolled process reference, total length and usable stroke, shaft ends, support arrangement, nut mounting, force/speed cycle, lubrication and environment. Identify the required accuracy or axial-play acceptance method.

Discuss your configuration

Send the exact model, operating cycle and assembly drawing. Ask for the offered configuration and drawing revision to be confirmed together.

Send your application requirements

Supporting product and drawing information

Rolled miniature ball screw family · Shaft-end drawing inputs · Nut mounting inputs

Custom requirements

Need help selecting a model or configuration?

Send the exact model, matching assembly scope and installation drawing. Confirm the offered dimensions, accuracy or clearance and inspection basis with the quotation.

Discuss your application
Product inquiry

Request a quote or engineering review