PFU0602 Rolled Miniature Ball Screw
Series / Model PFU0602
Compare PFU0602 rolled dimensions: 6 mm shaft, 2 mm lead and 16 mm nut length. Review the compact flange package and send the assembly drawing.
Overview
PFU0602 is a rolled miniature ball screw reference with a 6 mm shaft, 2 mm lead and 16 mm nut length. Its D = 12 mm and A = 24 mm dimensions define a different nut package from the existing PFU0606 and PFU0610 references. Use the exact row when balancing travel per revolution and available mounting space.
Published catalog reference
| Characteristic | Value | Unit or notation |
|---|---|---|
| Nominal shaft diameter d | 6 | mm |
| Lead I | 2 | mm/rev |
| Ball diameter Da | 1.2 | mm |
| Circuit notation n | 3 | catalog notation |
| Basic dynamic load rating Ca | 750 | N |
| Basic static load rating Coa | 1200 | N |
| Nut body dimension D | 12 | mm |
| Flange dimension A | 24 | mm |
| Dimension B | 3.5 | mm |
| Nut length L | 16 | mm |
| Dimension W | 18 | mm |
| Dimension H | 16 | mm |
| Dimension X | 3.4 | mm |
Ca and Coa are the catalog basic dynamic and static load ratings in N. They are not a blanket permissible operating load. The source row and the matching rolled PDF row agree, but this reference table is not an ordering or shaft-end machining drawing.
Compare lead choices without losing the mounting differences
PFU0602 sits between the 1 mm lead PFU0601 row and the published 6 mm and 10 mm lead references in the 6 mm shaft group. The same nominal shaft diameter does not carry one mounting envelope through that group. In particular, the larger-lead published rows use D = 14 mm and A = 27 mm rather than the D = 12 mm and A = 24 mm shown here.
Against PFU0601, the PFU0602 row keeps the main D and A dimensions but changes L from 15 to 16 mm. The ball diameter and basic load ratings also differ. Keep the quoted model and drawing together when reviewing an existing bracket, and leave space for fasteners, lubrication and the complete end-of-travel nut position. A partial dimensional match is not replacement approval.
Specify the complete installation
For PFU0602, identify whether the constraint is the 6 mm shaft interface, the 2 mm lead or the compact nut flange. Send the required stroke, support spacing, end-machining drawing and the loaded motion cycle.
Confirm total length, usable stroke, shaft ends, supports and the nut mounting interface as one assembly. State the required travel accuracy, axial play or preload, lubrication and environment. This page does not assign an accuracy grade, preload option, stock status, price or delivery date.
Questions about PFU0602
Can the 6 mm shaft group share one nut mounting drawing?
Do not assume so. PFU0602 has a D12/A24 reference, whereas the published PFU0606 and PFU0610 rows use D14/A27. Check all listed dimensions and the controlled assembly drawing for the selected model.
What differs from the PFU0601 reference?
The PFU0602 row has 2 mm lead and 16 mm nut length; PFU0601 has 1 mm lead and 15 mm length. The ball diameter and basic load ratings also change, so retain the complete row.
Do the PFU dimension and rating rows confirm an accuracy grade?
No accuracy grade, preload or axial-play configuration is assigned by this row. State the required travel accuracy and inspection conditions, then confirm the offered configuration on the quotation and controlled drawing.
What is needed to quote PFU0602 as a complete assembly?
Send the exact rolled model, quantity, total length, usable stroke, shaft-end and nut-mounting drawing, supports, load and speed cycle, lubrication and environment requirements. Confirm the offered drawing revision and commercial terms before ordering.
Request PFU0602 quotation review
Compare the Rolled miniature ball screw family table and the existing PFU0606 Rolled Miniature Ball Screw reference. Send the selected model and installation details through the PFU0602 inquiry page so the offered configuration can be identified.
Need help selecting a model or configuration?
Send the exact model, assembly drawing and load cycle. Confirm the offered configuration, drawing revision and inspection basis with the quotation.
