PFU0606 Rolled Miniature Ball Screw
Series / Model PFU0606
Review PFU0606 rolled ball screw dimensions: 6 mm diameter and 6 mm lead. Compare the nut envelope and circuit notation, then send your assembly drawing.
Overview
PFU0606 is the 6 mm nominal-diameter, 6 mm-lead reference in the rolled PFU table. Its nut body D is 14 mm and nut length L is 17 mm. The basic dynamic and static ratings are 1,260 N and 2,130 N; they do not establish the working thrust of an installed axis.
Verified rolled catalog reference
| Characteristic | Value | Unit |
|---|---|---|
| Nominal shaft diameter d | 6 | mm |
| Lead I | 6 | mm/rev |
| Ball diameter Da | 1.2 | mm |
| Circuit notation n (as printed) | 1.6*2 | — |
| Basic dynamic rating Ca | 1260 | N |
| Basic static rating Coa | 2130 | N |
| Nut body D | 14 | mm |
| Flange dimension A | 27 | mm |
| Flange thickness B | 4 | mm |
| Nut length L | 17 | mm |
| Drawing dimension W | 21 | mm |
| Drawing dimension H | 16 | mm |
| Drawing dimension X | 3.4 | mm |
Read physical PDF page 3 of the Series Ball Screw Catalog. Preserve the source drawing labels and obtain a controlled assembly drawing for manufacturing and inspection.
Review the nut package before choosing a small shaft
The 6 mm shaft designation can hide a larger installation requirement: the catalog flange dimension A is 27 mm, with W = 21 mm and H = 16 mm. Show the complete nut envelope and the carriage locating surfaces, not only a shaft centerline. Check fastener and lubrication access with the nut at both ends of the required travel.
Compare the complete reference
| Model | d (mm) | Lead (mm/rev) | D (mm) | A (mm) | B (mm) | L (mm) | Ca (N) | Coa (N) |
|---|---|---|---|---|---|---|---|---|
| PFU0606 | 6 | 6 | 14 | 27 | 4 | 17 | 1260 | 2130 |
| PFU0602 | 6 | 2 | 12 | 24 | 3.5 | 16 | 750 | 1200 |
| PFU0610 | 6 | 10 | 14 | 27 | 4 | 23 | 950 | 1600 |
PFU0602 uses the same nominal shaft diameter but a 2 mm lead, a 12 mm body D and a 16 mm nut length. PFU0610 shares the 14 mm body D of PFU0606 but has a 10 mm lead and a 23 mm nut length. The three references therefore change both the motion relationship and installation geometry.
Plan the motion and acceptance boundary
For an illustrative 600 rpm, the 6 mm lead corresponds to 60 mm/s. A 30 mm travel requires five shaft revolutions before acceleration and end margins are considered. This is a kinematic calculation, not a permissible speed or duty rating.
State the required travel accuracy, reversal behavior and inspection basis separately from nominal lead. The dimension row does not assign an available C3, C5 or C7 grade, preload, stock length or delivery condition.
Frequently asked questions
Does the n = 1.6*2 entry mean two thread starts?
No thread-start count is established by that entry. The source labels n as ball circuits and prints 1.6*2 for PFU0606. Keep that notation with the drawing reference; do not reinterpret it as the screw lead or number of thread starts.
Can PFU0602 be replaced without changing the nut mounting?
Not from the nominal shaft size alone. The rolled rows differ in body D, nut length, lead and ratings. Compare the full flange, mounting-hole and shaft-end drawings before considering a replacement.
Which drawing details should accompany this model request?
Provide the full model and rolled process reference, total length and usable stroke, shaft ends, support arrangement, nut mounting, force/speed cycle, lubrication and environment. Identify the required accuracy or axial-play acceptance method.
Discuss your configuration
Send the exact model, operating cycle and assembly drawing. Ask for the offered configuration and drawing revision to be confirmed together.
Supporting product and drawing information
Rolled miniature ball screw family · Shaft-end drawing inputs · Nut mounting inputs
Need help selecting a model or configuration?
Send the exact model, matching assembly scope and installation drawing. Confirm the offered dimensions, accuracy or clearance and inspection basis with the quotation.
