PFU1202w Rolled Ball Screw
Series / Model PFU1202w
Review PFU1202w rolled ball screw data: 11.5 mm shaft, 2 mm lead and 30 mm nut length. Compare the exact row and mounting interfaces before quotation.
Overview
PFU1202w is listed in the Series Motion rolled PFU table with a 11.5 mm shaft and 2 mm lead. This page brings the exact source row together with mounting and configuration checks for an inquiry.
Preserve the w suffix and the 11.5 mm shaft reference
PFU1202w lists d = 11.5 mm with 2 mm lead. It is not the same dimensional row as PFU1202, which lists d = 12 mm. Although both have D = 20 mm, PFU1202w uses A = 40 mm, B = 8 mm and L = 30 mm, compared with 37, 5 and 28 mm on PFU1202.
Keep the suffix in the inquiry, drawing filename and quotation line. Its effect is broader than a small shaft-diameter change: flange and axial dimensions also differ. Ask for the exact shaft-end and support interfaces to be confirmed; do not remove the suffix when matching the nut to an existing assembly.
Published rolled catalog reference
| Reference field | Value | Unit or notation |
|---|---|---|
| Shaft diameter d | 11.5 | mm |
| Lead I | 2 | mm/rev |
| Ball diameter Da | 1.588 | mm |
| Circuit notation n | 3 | catalog notation |
| Basic dynamic load rating Ca | 2840 | N |
| Basic static load rating Coa | 4440 | N |
| Nut body D | 20 | mm |
| Flange A | 40 | mm |
| Dimension B | 8 | mm |
| Nut length L | 30 | mm |
| Dimension W | 32 | mm |
| Dimension H | 30 | mm |
| Dimension X | 4.5 | mm |
The values above agree between the published rolled-family HTML row and physical page 3 of the company Ball Screw catalog (printed Ball Screw-2). Keep the source drawing with the dimensional letters. Ca and Coa are catalog basic load ratings in N, not recommended working loads or a simultaneous operating envelope.
Keep the process and complete assembly explicit
PFU identifies a nut configuration; it does not by itself establish rolled versus ground manufacture, an accuracy grade or a supplied preload. This reference uses the rolled table specifically. Preserve any suffix and distinguish the screw lead from ball-circuit notation when preparing the order description.
Review shaft ends, supports, nut mounting and the moving envelope together. Include the whole load and motion cycle rather than a single maximum speed or force. Lubrication, environmental protection and acceptance measurements should be agreed for the offered assembly. Catalog inclusion does not confirm current stock, price or delivery time.
Questions about PFU1202w
What distinguishes the PFU1202w reference?
PFU1202w lists d = 11.5 mm with 2 mm lead. It is not the same dimensional row as PFU1202, which lists d = 12 mm. Although both have D = 20 mm, PFU1202w uses A = 40 mm, B = 8 mm and L = 30 mm, compared with 37, 5 and 28 mm on PFU1202.
Does the PFU1202w row specify travel accuracy or preload?
The dimensions and load ratings do not assign a complete accuracy or preload configuration. State the required positioning accuracy, axial play or preload and inspection conditions, then confirm the offered assembly designation and drawing.
Is L = 30 mm the PFU1202w working stroke?
No. L is the nut-length dimension. Working stroke, total shaft length, end machining, bearing supports and end clearances need their own assembly drawing.
What information is required for a PFU1202w quotation?
Include the exact rolled model and any suffix, quantity, shaft length and end drawing, usable stroke, nut mounting layout, support arrangement, load and speed cycle, lubrication, environment and accuracy requirement. Ask for confirmation of the offered configuration and commercial terms.
Compare the source and send an inquiry
Open the rolled miniature ball screw family table and the PFU1202 Rolled Miniature Ball Screw reference. Send the exact model and installation drawing through the PFU1202w inquiry page for configuration review.
Need help selecting a model or configuration?
This page is a catalog reference. Send the exact model, drawing and load cycle to confirm the offered configuration and commercial terms.
