Products

Home›Products

PFU1202 Rolled Miniature Ball Screw
Miniature Ball Screw

PFU1202 Rolled Miniature Ball Screw

Series / Model PFU1202

Review PFU1202 rolled ball screw dimensions: 12 mm diameter and 2 mm lead. Check the process and send your complete mounting drawing for configuration review.

Product information

Overview

PFU1202 in the rolled miniature ball screw table is a 12 mm nominal-diameter, 2 mm-lead reference with four ball circuits. The catalog lists Ca = 2,100 N and Coa = 4,900 N. Specify the rolled reference explicitly: a separate ground table uses the same model text with a different lead entry, so the model name alone is insufficient for approval.

Catalog dimensions and load ratings

PFU1202 — rolled catalog reference
Characteristic Value Unit
Nominal shaft diameter d 12 mm
Lead I 2 mm/rev
Ball diameter Da 1.2 mm
Ball circuits n 4 —
Basic dynamic load rating Ca 2100 N
Basic static load rating Coa 4900 N
Nut body dimension D 20 mm
Flange dimension A 37 mm
Flange thickness B 5 mm
Nut length L 28 mm
Drawing dimension W 29 mm
Drawing dimension H 24 mm
Drawing dimension X 4.5 mm

Reference: Series Ball Screw Catalog, physical PDF page 3. Dimensions are in millimeters except the stated load ratings and circuit count. Lettered dimensions retain the source drawing labels; obtain a controlled assembly drawing for manufacturing and inspection.

Check the mounting envelope

Reserve the actual flange and nut envelope: D = 20 mm, A = 37 mm, B = 5 mm and L = 28 mm in the rolled table. Review how the nut seat transfers axial force into the carriage, and which external guide carries side loads and overturning moments. Increasing the catalog nut load rating does not establish the stiffness or buckling capacity of the installed shaft.

Prepare the ball nut mounting drawing and check the shaft-end interfaces before approving mating parts.

Lead and motion planning

A 2 mm lead converts an illustrative 900 rpm into 30 mm/s. A 60 mm stroke requires 30 shaft revolutions, before allowing for end margins or the acceleration profile. These examples establish the lead relationship only. The installed rotating span, root diameter, support stiffness, preload and motor system require separate review.

One shaft revolution advances the nut by the specified lead in the ideal kinematic relationship. Encoder or motor command resolution is not the same as positioning accuracy at the work point.

Compare the exact catalog variants

Nearby rolled references — dimensional screening only
Model d (mm) Lead (mm/rev) D (mm) L (mm) Ca (N) Coa (N)
PFU1202, rolled 12 2 20 28 2100 4900
PFU1202w, rolled 11.5 2 20 30 2840 4440
PFU1002, rolled 10 2 18 28 1455 3275

The PFU1202w row uses an 11.5 mm nominal diameter and a 30 mm nut length, despite sharing D = 20 mm. PFU1002 shares the 2 mm lead and 28 mm nut length but uses a 10 mm shaft and an 18 mm body D with different ratings. Compare the complete row and mounting drawing, not a shared lead or a single load number.

Accuracy, preload and application fit

C3, C5 and C7 are accuracy designations, not load classes. This catalog row does not establish an available grade, a preload level or a positioning tolerance for the assembled axis. Specify the characteristic and inspection basis instead of choosing a grade from the model name.

For a compact inspection, adjustment or dispensing axis, first define travel, cycle profile and the load at the nut. Use a separate guide arrangement for side loads and moments, and review any compressed shaft segment. Confirm application suitability against the complete installation and its acceptance criteria.

Check compression-span inputs; review miniature ball screw selection.

Frequently asked questions

Why must the PFU1202 process and lead be written explicitly?

The rolled table lists PFU1202 with a 2 mm lead, while a separate ground table and the current ground-family page show a 1 mm lead entry under the same model text. This page uses only the rolled 2 mm row. Resolve the drawing and process designation before an order; do not combine the two records.

Are Ca and Coa the allowable working loads of my machine?

No. They are catalog basic load ratings for the stated reference. Service life, peak and shock loads, preload, shaft compression, support bearings and the installed load path require separate checks.

Does this row confirm C3, C5 or C7 accuracy?

No accuracy grade is assigned by this dimension row. State the required travel accuracy, travel length, preload or axial play and inspection conditions in the request. Confirm the offered grade and its acceptance criteria on the quotation and drawing.

What should I send for a configuration review?

Send the full model and process reference, total length and usable stroke, end-machining drawing, nut mounting details, load and speed cycle, support arrangement, lubrication and environment requirements. Include quantity and any required inspection report.

Discuss your configuration

Send the model, rolled process reference and assembly drawing together. State which dimensions, accuracy requirements and operating conditions need confirmation.

Send your application requirements

Related product information

Rolled miniature ball screw family · Ground miniature ball screw family — verify its separate reference table

Custom requirements

Need help selecting a model or configuration?

Send the exact model, matching assembly scope and installation drawing. Confirm the offered dimensions, accuracy or clearance and inspection basis with the quotation.

Discuss your application
Product inquiry

Request a quote or engineering review