Products

Home›Products

PFU0601 Rolled Miniature Ball Screw
Miniature Ball Screw

PFU0601 Rolled Miniature Ball Screw

Series / Model PFU0601

Review PFU0601 rolled dimensions: 6 mm shaft, 1 mm lead and a D12/A24 nut package. Check the source ratings and mounting drawing for quotation.

Product information

Overview

PFU0601 is the rolled 6 mm shaft reference with 1 mm lead. Its table gives D = 12 mm, A = 24 mm and L = 15 mm for the nut package. This is a separate mounting option from the published 6 mm shaft models with larger leads; the shaft diameter alone does not preserve their nut geometry.

Published catalog reference

PFU0601 – rolled catalog reference
Characteristic Value Unit or notation
Nominal shaft diameter d 6 mm
Lead I 1 mm/rev
Ball diameter Da 0.8 mm
Circuit notation n 3 catalog notation
Basic dynamic load rating Ca 560 N
Basic static load rating Coa 950 N
Nut body dimension D 12 mm
Flange dimension A 24 mm
Dimension B 3.5 mm
Nut length L 15 mm
Dimension W 18 mm
Dimension H 16 mm
Dimension X 3.4 mm

Ca and Coa are the catalog basic dynamic and static load ratings in N. They are not a blanket permissible operating load. The source row and the matching rolled PDF row agree, but this reference table is not an ordering or shaft-end machining drawing.

Review the small-lead 6 mm mounting envelope

The published PFU0606 and PFU0610 rows both list D = 14 mm and A = 27 mm. PFU0601 instead uses D = 12 mm and A = 24 mm. A bracket designed around the larger nut should therefore be checked against the actual PFU0601 interface rather than reduced by a nominal shaft-size rule. Keep B, W, H and X with the selected row.

PFU0601 and PFU0602 share the 6 mm shaft and several main envelope dimensions, but have different lead, ball diameter, load ratings and nut length. This page is useful when the design begins with a 1 mm-per-revolution requirement. It does not assign a positioning tolerance or establish that a smaller lead will meet the complete machine accuracy requirement.

Specify the complete installation

For PFU0601, send the planned 24 mm flange interface and indicate whether a previous 6 mm assembly is being replaced. Include measured end interfaces or a controlled replacement drawing, rather than only a model photograph.

Confirm total length, usable stroke, shaft ends, supports and the nut mounting interface as one assembly. State the required travel accuracy, axial play or preload, lubrication and environment. This page does not assign an accuracy grade, preload option, stock status, price or delivery date.

Questions about PFU0601

Does PFU0601 have the same nut envelope as PFU0606?

No. The rolled PFU0601 row lists D = 12 mm and A = 24 mm, while PFU0606 lists D = 14 mm and A = 27 mm. Review the full dimension row and assembly drawing.

Does 1 mm lead specify the accuracy of PFU0601?

No. Lead describes nominal travel per revolution. Required travel accuracy, permissible axial play, support conditions and inspection criteria must be stated separately and confirmed for the offered assembly.

Do the PFU dimension and rating rows confirm an accuracy grade?

No accuracy grade, preload or axial-play configuration is assigned by this row. State the required travel accuracy and inspection conditions, then confirm the offered configuration on the quotation and controlled drawing.

What is needed to quote PFU0601 as a complete assembly?

Send the exact rolled model, quantity, total length, usable stroke, shaft-end and nut-mounting drawing, supports, load and speed cycle, lubrication and environment requirements. Confirm the offered drawing revision and commercial terms before ordering.

Request PFU0601 quotation review

Compare the Rolled miniature ball screw family table and the existing PFU0606 Rolled Miniature Ball Screw reference. Send the selected model and installation details through the PFU0601 inquiry page so the offered configuration can be identified.

Custom requirements

Need help selecting a model or configuration?

Send the exact model, assembly drawing and load cycle. Confirm the offered configuration, drawing revision and inspection basis with the quotation.

Discuss your application
Product inquiry

Request a quote or engineering review