PFU0802.5 Rolled Miniature Ball Screw
Series / Model PFU0802.5
Check PFU0802.5 rolled ball screw data: 8 mm diameter and 2.5 mm lead. Keep the fractional lead and verify the nut envelope before sending an assembly drawing.
Overview
PFU0802.5 is the rolled 8 mm nominal-diameter reference with a 2.5 mm lead. Its body D is 16 mm and nut length L is 26 mm, with Ca = 1,345 N and Coa = 2,694 N. The decimal portion is part of the model identity and must not be dropped during drawing or order preparation.
Verified rolled catalog reference
| Characteristic | Value | Unit |
|---|---|---|
| Nominal shaft diameter d | 8 | mm |
| Lead I | 2.5 | mm/rev |
| Ball diameter Da | 1.2 | mm |
| Circuit notation n (as printed) | 3 | — |
| Basic dynamic rating Ca | 1345 | N |
| Basic static rating Coa | 2694 | N |
| Nut body D | 16 | mm |
| Flange dimension A | 29 | mm |
| Flange thickness B | 4 | mm |
| Nut length L | 26 | mm |
| Drawing dimension W | 23 | mm |
| Drawing dimension H | 20 | mm |
| Drawing dimension X | 3.4 | mm |
Read physical PDF page 3 of the Series Ball Screw Catalog. Preserve the source drawing labels and obtain a controlled assembly drawing for manufacturing and inspection.
Preserve the lead and flange geometry together
The flange dimension A is 29 mm, thickness B is 4 mm, W is 23 mm and H is 20 mm. Write these against the source drawing labels when comparing a nut housing. Sharing the 8 mm shaft designation with another reference does not establish the same locating body, flange footprint or stroke clearance.
Compare the complete reference
| Model | d (mm) | Lead (mm/rev) | D (mm) | A (mm) | B (mm) | L (mm) | Ca (N) | Coa (N) |
|---|---|---|---|---|---|---|---|---|
| PFU0802.5 | 8 | 2.5 | 16 | 29 | 4 | 26 | 1345 | 2694 |
| PFU0802 | 8 | 2 | 14 | 27 | 4 | 16 | 1300 | 2300 |
| PFU0802.5w | 7.5 | 2.5 | 16 | 31 | 8 | 25 | 2180 | 2660 |
Plain PFU0802 has a 2 mm lead, 14 mm body D and 16 mm nut length. PFU0802.5w has a 7.5 mm nominal shaft diameter, a 31 mm flange A, an 8 mm flange thickness B and a 25 mm nut length. The fractional-lead and w references need separate identification even where some dimensions agree.
Plan the motion and acceptance boundary
For a hypothetical 600 rpm, a 2.5 mm lead gives 25 mm/s. A 25 mm move represents ten revolutions. If replacing a 2 mm-lead assembly, document the changed travel-per-revolution relationship in the machine design; this page does not authorize a live control-scaling change.
State the required travel accuracy, reversal behavior and inspection basis separately from nominal lead. The dimension row does not assign an available C3, C5 or C7 grade, preload, stock length or delivery condition.
Frequently asked questions
Is PFU0802.5 the same model as PFU0802?
No. The catalog leads are 2.5 mm and 2 mm respectively, and their nut dimensions also differ. Preserve the decimal model text and verify the full drawing.
Is PFU0802.5w a direct replacement?
The source does not establish interchangeability. It changes the nominal shaft diameter and several nut dimensions. Keep the w reference distinct and review the retained supports, housing and complete mounting drawing.
Which drawing details should accompany this model request?
Provide the full model and rolled process reference, total length and usable stroke, shaft ends, support arrangement, nut mounting, force/speed cycle, lubrication and environment. Identify the required accuracy or axial-play acceptance method.
Discuss your configuration
Send the exact model, operating cycle and assembly drawing. Ask for the offered configuration and drawing revision to be confirmed together.
Supporting product and drawing information
Rolled miniature ball screw family · Shaft-end drawing inputs · Nut mounting inputs
Need help selecting a model or configuration?
Send the exact model, matching assembly scope and installation drawing. Confirm the offered dimensions, accuracy or clearance and inspection basis with the quotation.
