Products

Home›Products

PFU0804 Rolled Miniature Ball Screw
Miniature Ball Screw

PFU0804 Rolled Miniature Ball Screw

Series / Model PFU0804

Review PFU0804 rolled dimensions: 8 mm shaft, 4 mm lead and 21.9 mm nut length. Compare nearby lead options and confirm the mounting drawing.

Product information

Overview

PFU0804 is a rolled catalog reference with an 8 mm shaft and 4 mm lead. Its nut dimensions include D = 16 mm, A = 29 mm and L = 21.9 mm. This is an intermediate lead choice in the 8 mm shaft group, with its own circuit notation, basic load ratings and mounting envelope.

Published catalog reference

PFU0804 – rolled catalog reference
Characteristic Value Unit or notation
Nominal shaft diameter d 8 mm
Lead I 4 mm/rev
Ball diameter Da 1.5875 mm
Circuit notation n 1.6*2 catalog notation
Basic dynamic load rating Ca 1714 N
Basic static load rating Coa 2763 N
Nut body dimension D 16 mm
Flange dimension A 29 mm
Dimension B 4 mm
Nut length L 21.9 mm
Dimension W 23 mm
Dimension H 20 mm
Dimension X 3.4 mm

Ca and Coa are the catalog basic dynamic and static load ratings in N. They are not a blanket permissible operating load. The source row and the matching rolled PDF row agree, but this reference table is not an ordering or shaft-end machining drawing.

Check the 21.9 mm nut length and source circuit notation

The published PFU0802.5 row shares D = 16 mm and A = 29 mm, but its L dimension is 26 mm. PFU0804 is therefore a separate axial-space reference, even before comparing the lead and ratings. Use the full nut position at both travel limits and the shaft-end drawing when screening a short mechanism; the model table does not establish usable stroke.

The catalog prints n as 1.6*2 for PFU0804. That notation is retained here rather than rounded to an integer or used to invent an internal circulation design. The published PFU0808 has a different D18/A31 envelope and a 20 mm L dimension. Increasing lead across this family is not a rule for increasing every nut dimension, so compare the actual rows.

Specify the complete installation

For PFU0804, show the D16/A29 mounting space and the 21.9 mm nut-length allowance. Include the intended lead requirement, supports, end machining and reversal cycle so the offered assembly can be checked as a whole.

Confirm total length, usable stroke, shaft ends, supports and the nut mounting interface as one assembly. State the required travel accuracy, axial play or preload, lubrication and environment. This page does not assign an accuracy grade, preload option, stock status, price or delivery date.

Questions about PFU0804

What does the PFU0804 n value mean on this page?

The source prints n = 1.6*2 under its number-of-circuits heading. This page preserves that catalog notation. A controlled assembly drawing or technical confirmation is needed for any internal geometry interpretation.

Can PFU0802.5 or PFU0808 stand in for PFU0804?

No interchangeability is established. PFU0802.5 has a different lead and nut length, while PFU0808 also changes the D and A envelope. Compare all dimensions and the actual assembly drawing before replacement.

Do the PFU dimension and rating rows confirm an accuracy grade?

No accuracy grade, preload or axial-play configuration is assigned by this row. State the required travel accuracy and inspection conditions, then confirm the offered configuration on the quotation and controlled drawing.

What is needed to quote PFU0804 as a complete assembly?

Send the exact rolled model, quantity, total length, usable stroke, shaft-end and nut-mounting drawing, supports, load and speed cycle, lubrication and environment requirements. Confirm the offered drawing revision and commercial terms before ordering.

Request PFU0804 quotation review

Compare the Rolled miniature ball screw family table and the existing PFU0802.5 Rolled Miniature Ball Screw reference. Send the selected model and installation details through the PFU0804 inquiry page so the offered configuration can be identified.

Custom requirements

Need help selecting a model or configuration?

Send the exact model, assembly drawing and load cycle. Confirm the offered configuration, drawing revision and inspection basis with the quotation.

Discuss your application
Product inquiry

Request a quote or engineering review