PFU1010 Rolled Miniature Ball Screw
Series / Model PFU1010
Check PFU1010 rolled ball screw data: 10 mm shaft diameter, 10 mm lead and 24 mm nut length. Compare longer-lead variants before requesting a drawing review.
Overview
PFU1010 in the rolled PFU table has a 10 mm nominal shaft diameter, 10 mm lead and 24 mm nut length L. The body dimension D is 23 mm. Its Ca = 3,300 N and Coa = 5,980 N entries are basic catalog ratings and require the applicable life and peak-load checks.
Verified rolled catalog reference
| Characteristic | Value | Unit |
|---|---|---|
| Nominal shaft diameter d | 10 | mm |
| Lead I | 10 | mm/rev |
| Ball diameter Da | 2 | mm |
| Circuit notation n (as printed) | 1.6*2 | — |
| Basic dynamic rating Ca | 3300 | N |
| Basic static rating Coa | 5980 | N |
| Nut body D | 23 | mm |
| Flange dimension A | 40 | mm |
| Flange thickness B | 5 | mm |
| Nut length L | 24 | mm |
| Drawing dimension W | 32 | mm |
| Drawing dimension H | 25 | mm |
| Drawing dimension X | 4.5 | mm |
Read physical PDF page 3 of the Series Ball Screw Catalog. Preserve the source drawing labels and obtain a controlled assembly drawing for manufacturing and inspection.
Use the axial envelope to distinguish the 10 mm-shaft options
The row gives a 40 mm flange dimension A, 5 mm thickness B, W = 32 mm and H = 25 mm. Add the housing, fasteners and actual shaft-end transitions to the clearance review. The compact listed L does not define assembled rigidity, permitted overrun or end-bearing spacing.
Compare the complete reference
| Model | d (mm) | Lead (mm/rev) | D (mm) | A (mm) | B (mm) | L (mm) | Ca (N) | Coa (N) |
|---|---|---|---|---|---|---|---|---|
| PFU1010 | 10 | 10 | 23 | 40 | 5 | 24 | 3300 | 5980 |
| PFU1015 | 10 | 15 | 23 | 40 | 5 | 33 | 3300 | 5980 |
| PFU1020 | 10 | 20 | 23 | 40 | 5 | 42 | 3300 | 5980 |
PFU1015 and PFU1020 list the same body D, flange A and the same basic ratings as PFU1010, but their leads are 15 mm and 20 mm and their nut lengths are 33 mm and 42 mm. The choice changes the motion conversion and occupied axial space even when load columns agree.
Plan the motion and acceptance boundary
A hypothetical 600 rpm corresponds to 100 mm/s with a 10 mm lead. A 50 mm displacement represents five revolutions before acceleration is included. Review motor speed, torque, reflected inertia and shaft-speed constraints for the actual machine instead of selecting by revolutions alone.
State the required travel accuracy, reversal behavior and inspection basis separately from nominal lead. The dimension row does not assign an available C3, C5 or C7 grade, preload, stock length or delivery condition.
Frequently asked questions
Do equal catalog ratings make PFU1010 and PFU1020 equivalent?
No. Their leads and nut lengths differ. A valid replacement or new design must match both the installation and the motion conversion, as well as the complete operating load case.
What does the 24 mm L dimension describe?
It is the nut length labeled L in the rolled catalog drawing. It is not the shaft length, support span or usable machine stroke.
Which drawing details should accompany this model request?
Provide the full model and rolled process reference, total length and usable stroke, shaft ends, support arrangement, nut mounting, force/speed cycle, lubrication and environment. Identify the required accuracy or axial-play acceptance method.
Discuss your configuration
Send the exact model, operating cycle and assembly drawing. Ask for the offered configuration and drawing revision to be confirmed together.
Supporting product and drawing information
Rolled miniature ball screw family · Shaft-end drawing inputs · Nut mounting inputs
Need help selecting a model or configuration?
Send the exact model, matching assembly scope and installation drawing. Confirm the offered dimensions, accuracy or clearance and inspection basis with the quotation.
