Products

Home›Products

PFU1020 Rolled Miniature Ball Screw
Miniature Ball Screw

PFU1020 Rolled Miniature Ball Screw

Series / Model PFU1020

Review PFU1020 rolled ball screw data: 10 mm diameter, 20 mm lead and 42 mm nut length. Check the speed conversion and send your mounting layout for review.

Product information

Overview

PFU1020 is the rolled 10 mm nominal-diameter reference with a 20 mm lead. The catalog lists a 23 mm body D and a 42 mm nut length L. A lead larger than the nominal shaft diameter is a kinematic specification; it is not a statement of accuracy, speed limit or thread-start count.

Verified rolled catalog reference

PFU1020 — rolled reference
Characteristic Value Unit
Nominal shaft diameter d 10 mm
Lead I 20 mm/rev
Ball diameter Da 2 mm
Circuit notation n (as printed) 1.6*2 —
Basic dynamic rating Ca 3300 N
Basic static rating Coa 5980 N
Nut body D 23 mm
Flange dimension A 40 mm
Flange thickness B 5 mm
Nut length L 42 mm
Drawing dimension W 32 mm
Drawing dimension H 25 mm
Drawing dimension X 4.5 mm

Read physical PDF page 3 of the Series Ball Screw Catalog. Preserve the source drawing labels and obtain a controlled assembly drawing for manufacturing and inspection.

Allow space for the longer nut assembly

The flange dimension A is 40 mm and thickness B is 5 mm, with W = 32 mm and H = 25 mm. Check the nut and attachment at the governing end positions. Include the usable threaded region, end machining and support arrangement in the drawing, rather than deriving usable travel from total shaft length.

Compare the complete reference

Related rolled references
Model d (mm) Lead (mm/rev) D (mm) A (mm) B (mm) L (mm) Ca (N) Coa (N)
PFU1020 10 20 23 40 5 42 3300 5980
PFU1010 10 10 23 40 5 24 3300 5980
PFU1015 10 15 23 40 5 33 3300 5980

PFU1010 and PFU1015 have the same listed 23 mm body D and basic ratings, but nut length changes from 24 mm to 33 mm to the PFU1020 value of 42 mm. Their respective leads are 10, 15 and 20 mm. The longest-lead row does not preserve the same axial mounting envelope.

Plan the motion and acceptance boundary

For a hypothetical 600 rpm, a 20 mm lead corresponds to 200 mm/s; a 100 mm move requires five revolutions. This does not show that the assembly can run at that speed. Use the actual stroke, acceleration, cycle, support span and drive arrangement for speed and force review.

State the required travel accuracy, reversal behavior and inspection basis separately from nominal lead. The dimension row does not assign an available C3, C5 or C7 grade, preload, stock length or delivery condition.

Frequently asked questions

May the 20 mm lead be inferred to mean a particular start count?

No. Lead is travel per revolution. The source circuit notation n = 1.6*2 does not supply a thread-start count; use the controlled thread drawing for that geometry.

Can PFU1010 and PFU1020 use the same motion scaling?

They have different travel per revolution. Document the intended reference and scaling in the design review. Any control-system change requires a separate commissioning procedure and is not performed by this page.

Which drawing details should accompany this model request?

Provide the full model and rolled process reference, total length and usable stroke, shaft ends, support arrangement, nut mounting, force/speed cycle, lubrication and environment. Identify the required accuracy or axial-play acceptance method.

Discuss your configuration

Send the exact model, operating cycle and assembly drawing. Ask for the offered configuration and drawing revision to be confirmed together.

Send your application requirements

Supporting product and drawing information

Rolled miniature ball screw family · Shaft-end drawing inputs · Nut mounting inputs

Custom requirements

Need help selecting a model or configuration?

Send the exact model, matching assembly scope and installation drawing. Confirm the offered dimensions, accuracy or clearance and inspection basis with the quotation.

Discuss your application
Product inquiry

Request a quote or engineering review