Products

Home›Products

PFU0802 Rolled Miniature Ball Screw
Miniature Ball Screw

PFU0802 Rolled Miniature Ball Screw

Series / Model PFU0802

Check the PFU0802 rolled ball screw: 8 mm diameter, 2 mm lead and catalog dimensions. Distinguish PFU0802w before sending a drawing for configuration review.

Product information

Overview

PFU0802 in the rolled miniature ball screw table has an 8 mm nominal diameter, a 2 mm lead and a 14 mm nut body diameter D. Its catalog basic dynamic and static load ratings are 1,300 N and 2,300 N. Match this exact row and process designation to your drawing; the similar PFU0802w designation identifies different dimensions.

Catalog dimensions and load ratings

PFU0802 — rolled catalog reference
Characteristic Value Unit
Nominal shaft diameter d 8 mm
Lead I 2 mm/rev
Ball diameter Da 1.2 mm
Ball circuits n 3 —
Basic dynamic load rating Ca 1300 N
Basic static load rating Coa 2300 N
Nut body dimension D 14 mm
Flange dimension A 27 mm
Flange thickness B 4 mm
Nut length L 16 mm
Drawing dimension W 21 mm
Drawing dimension H 18 mm
Drawing dimension X 3.4 mm

Reference: Series Ball Screw Catalog, physical PDF page 3. Dimensions are in millimeters except the stated load ratings and circuit count. Lettered dimensions retain the source drawing labels; obtain a controlled assembly drawing for manufacturing and inspection.

Check the mounting envelope

Check the 27 mm flange dimension A and 16 mm nut length L against the carriage and nearby components. The row also gives W = 21 mm, H = 18 mm and X = 3.4 mm. Those lettered dimensions belong to the catalog drawing; they do not by themselves define the locating fit, fastener grade, tightening torque or lubrication connection. Include those details in the drawing review.

Prepare the ball nut mounting drawing and check the shaft-end interfaces before approving mating parts.

Lead and motion planning

At an illustrative 600 rpm, a 2 mm lead gives 20 mm/s before motion-profile limits are considered. A 20 mm travel requires 10 shaft revolutions. Use the actual stroke, acceleration, support arrangement and rotating length to review critical speed and motor demands; the example is not a permissible operating-speed claim.

One shaft revolution advances the nut by the specified lead in the ideal kinematic relationship. Encoder or motor command resolution is not the same as positioning accuracy at the work point.

Compare the exact catalog variants

Nearby rolled references — dimensional screening only
Model d (mm) Lead (mm/rev) D (mm) L (mm) Ca (N) Coa (N)
PFU0802 8 2 14 16 1300 2300
PFU0802w 7.5 2 16 25 2180 2660
PFU0802.5 8 2.5 16 26 1345 2694

Keep the suffixes intact. PFU0802w has a 7.5 mm nominal diameter in this rolled table and a 16 mm body D with a 25 mm length L. PFU0802.5 changes the lead to 2.5 mm and also changes the nut envelope. Neither should be silently substituted for an 8 × 2 mm PFU0802 request.

Accuracy, preload and application fit

C3, C5 and C7 are accuracy designations, not load classes. This catalog row does not establish an available grade, a preload level or a positioning tolerance for the assembled axis. Specify the characteristic and inspection basis instead of choosing a grade from the model name.

For a compact inspection, adjustment or dispensing axis, first define travel, cycle profile and the load at the nut. Use a separate guide arrangement for side loads and moments, and review any compressed shaft segment. Confirm application suitability against the complete installation and its acceptance criteria.

Check compression-span inputs; review miniature ball screw selection.

Frequently asked questions

Is PFU0802w interchangeable with PFU0802?

The catalog does not establish interchangeability. Its rolled rows differ in shaft diameter, nut envelope, ball diameter and load ratings. Keep the complete model suffix and verify the mating assembly drawing before considering a replacement.

Are Ca and Coa the allowable working loads of my machine?

No. They are catalog basic load ratings for the stated reference. Service life, peak and shock loads, preload, shaft compression, support bearings and the installed load path require separate checks.

Does this row confirm C3, C5 or C7 accuracy?

No accuracy grade is assigned by this dimension row. State the required travel accuracy, travel length, preload or axial play and inspection conditions in the request. Confirm the offered grade and its acceptance criteria on the quotation and drawing.

What should I send for a configuration review?

Send the full model and process reference, total length and usable stroke, end-machining drawing, nut mounting details, load and speed cycle, support arrangement, lubrication and environment requirements. Include quantity and any required inspection report.

Discuss your configuration

Send the model, rolled process reference and assembly drawing together. State which dimensions, accuracy requirements and operating conditions need confirmation.

Send your application requirements

Related product information

Rolled miniature ball screw family · Ground miniature ball screw family — verify its separate reference table

Custom requirements

Need help selecting a model or configuration?

Send the exact model, matching assembly scope and installation drawing. Confirm the offered dimensions, accuracy or clearance and inspection basis with the quotation.

Discuss your application
Product inquiry

Request a quote or engineering review